Search Documents

Jan 1, 1990

MR. LITTLEJOHN: Have you any maximum length that you make your dust barriers? What I mean by that is, your entries are 10 feet wide, and I believe if I remember right, in your single track entries you had only one dust barrier to cover the full width of the. entry in your double track entries, I believe you had two-I would like to know, have you any maximum length you make these barriers? MR. CHAS. LEGER, ROYAL FUEL CO., UTAH: It is stated that they shouldn't be over 8 feet long to obtain sensitiveness. If they make them over 8 feet they are not as sensitive as they should be. They should be made short for two reasons in order to keep the sagging out and to make them as sensitive as possible. MR. DAN HARRINGTON, U. S. BUREAU OF MINES: I didn't come here to enter into any extended discussion on rock dusting or to discuss in particular the situation at Dawson. At the February meeting at Denver, we made a complete study of this matter. Since that time a report was completed and reported to the Phelps-Dodge Corporation and Mr. Moorhead probably has a copy of it, which can give you more complete information as to what we found. We found that with the adobe dusting that they have done, they had six miles of entry pretty thoroughly dusted and of all the samples we took, at least 95 percent of them showed that not only the floor but the ribs and roof were in such a condition that an explosion could not originate in any part of this entry. In other words, this entry as it was dusted was absolutely protected from ignition and propagation. The adobe they used was of material that was non-combustible. In most instances there was not more than 3 per cent of moisture in it.

Jan 1, 1924

By F. C. Miller

The briquetting of fuel is an industry centuries old and has followed the hammer and tongs method of making use of any by-product fuel by the simple process of sticking the mass together with anything that will stick. If fuel briquetting, as an industry, once in the lead over coal mining, had kept pace by introducing science, there would not at this time be the mad scramble to look up the fuel briquette family tree and accept every new method as fruit without the cultivation that makes fruit worth while. Cultivation of industry is a mass of evidence showing a tremendous expenditure of money for mistakes paving the way to success. Cultivation of the mining industry is practiced by nations and low temperature distillation and fuel briquetting will in the near future receive the same consideration. Fuel briquettes were used as a winter fuel in Ireland and Scotland before the discovery of America' or the introduction of coal as a fuel to replace briquettes in Ireland. This industry was practiced by the peasants who collected peat from the bogs and cut it into brick-shaped blocks, which were set up to dry in the sun and stored under cover for use or for sale. Demand for peat briquettes led to competition that resulted in a highly refined fuel. In some localities the peat was ground and purified from the earth by washing before placing in presses to squeeze out the excess moisture and form a block of peat about four inches thick. These blocks, after standing in the sun for a few weeks, were cut into briquettes about four inches square by twelve inches long and moved under cover where they remained until thoroughly dry. In this form peat makes an excellent fuel with considerable heat, small amount of smoke while burning, and tough enough to stand hauling in carts and boats without breakage. Slack from domestic coal, non-coking and anthracite, has until recently commanded a very low price and the attention of briquette men has centered on ways and means of preparing this class of fuel for the market in the form of briquettes. Industrial plants with automatic stokers have taken kindly to cheap slack or slack that was cheap because the price has been boosted to a figure where the cost of slack plus the cost of binder and operation makes fuel briquettes somewhat expensive. However, fuel briquettes are being turned out in commercial quantities to compete with prepared lump coal and the demand is in favor of the briquette man. Science has been called to aid the briquette and it is possible to purchase a complete coal briquetting plant that will turn out between four tons per hour and thirty tons per hour of briquettes at a calculated cost per ton to cover material and every item down to insurance on the plant. A few briquettes are being ' made with a mixture of- Portland cement and pulverized coal, where this class of briquette is cheap in the making, there is the increased amount of ash due to the cement to contend with and the briquette is not one that can compete with lump coal. Most binders have a fuel value, such as coal tar, pitch, asphalt residium, flour, glue and secret binders. Most briquettes are of an egg shape, weighing between one and one-half ounces and five ounces, pressed to form with a pressure varying between 1,000 pounds and 2,500 pounds per square inch. This' pressure, together with the binder, make a lump of fuel harder than most grades of soft coal. Most of the briquettes are free from pitch odor, and any tendency to leave a trace of the binder on the fingers, easy to handle, quick to, ignite, high in heat value and capable of indefinite storage without any change. Evaporative efficiency of briquetted fuel in stationary, marine and locomotive boilers has proved that a great many low-grade coals can be fired successfully in the briquetted form, where the same fuel without briquetting failed to give boiler rating.

Jan 1, 1923

Thomas J. LIEN RMCMI PRESIDENT 1997-1998 on behalf of the RMCMI Board of Directors and Officers of The Rocky Mountain Coal Mining Institute cordially invites you and your family to attend the 94TH Regular Meeting and Convention to be held June 27 thru June 29, 1998 Snowmass Village, Colorado

Jan 1, 1997

MR. GERALD ALLEY (C 11 i e f Draftsman, C. F. & I. Co.) : This invention is primarily intended to correct anything that goes wrong with the fan and any conditions in your air current underground which do not produce a change in your fan water gauge

Jan 1, 1925

Jan 1, 1935

By P. F. Patterson

It is a well established fact that 60 per cent of all accidents in coal mines occur from falls of roof and coal at or in the proximity of the working face. Notwithstanding that this is well known, and has been frequently discussed by mining men, this seems to be the irreducible minimum. It is even said by those in a position to know that the percentage stated is increasing. With this, information before us it would seem that not enough attention is being given to close supervision at the working face, and until this is done we may expect to continue experiencing an increase in the accidents in this area. No workman generally feels that it is more important to finish loading a car of coal than to set a timber for protection, and many accidents happen from this source, not from a lack of knowledge of the dangerous conditions existing, but negligence in taking remedies necessary to remove the danger. It is true that nearly all state laws require the mine foreman or his assistant to visit each working face every day, but with the constantly changing conditions on account of the advance of the working faces, these daily visits may be entirely inadequate to discover possible dangers and prevent accidents. The obvious remedy then is closer and more systematic inspection and supervision of the working faces. Many accidents are caused in mines on account of not enough clearance between the rib and track or between timber and track. On all main haulage ways. there should be a space of at least 30 inches between the rib and track, or timber and track, and on all rooms not less than two feet should be left between the track and upright timbers.. A great deal has been said and written with regard to systematic timbering. We doubt very much the feasibility of adopting any standard of timbering that would be suitable for all roof conditions, and any such system in our opinion would not tend to cause a decrease in the number of accidents. The proper place to put up a prop, regardless of whether it conforms to any established system, is under a piece of loose roof. No habit is becoming more prevalent among miners and other mine workers than wearing gloves, principally flimsy canvas gloves, which afford no protection to the wearers and are the direct cause of many hand injuries. If gloves must be worn, and no doubt they will be as the habit has become well established, then they should be made from some heavy material and should fit the hands fairly snug.

Jan 1, 1923

The second annual RMCMI Mine Rescue Performance Evaluation was held in conjunction with the 1993 RMCMI Convention at Beaver Creek. [ ] Six teams participated in this year's evaluation; BHP Minerals, Navajo Mine, Fruitland. NM; BHP Minerals - LaPlata Mine. LaPlata, NM; BHP Minerals - San Juan Mine. Waterflow. NM; The Coteau Properties Company - Freedom Mine, Beulah. ND; Cordero Mining Company, Gillette, WY; and The Falkirk Mining Company - Falkirk Mine. Underwood, ND. The Western Energy Company of Colstrip, MT was represented through observers and evaluators. [ ] Realistic industrial related scenarios, closely simulating the stress of actual rescue incidents, were provided by members of the Eagle Valley Ambulance Service. Five different scenarios were presented to each team on the first day of the evaluation and three on the second. Each team was given the pertinent information to solve the problem as they assembled at the scenario site. The scenarios were going on simultaneously and each team was unaware of the circumstances until they entered the scene. Interested onlookers were afforded the opportunity of viewing the actual simulated rescue operations as they occurred. The teams received valuable pointers and direction from the ream of evaluators following each scenario. They were are also given the opportunity to observe the other teams in action and to meet with the members of all the teams to share information and ideas during team meetings per the predetermined schedule. The primary goal is to recognize current rescue skills, knowledge, and abilities of participating teams. In doing this, each team was provided with individual evaluations and a path for improvement as needed. Each team was recognized for their efforts at an awards breakfast on the final day of the evaluation. New innovations in rescue equipment were introduced and demonstrated for interested teams following the awards program. The importance of progressive training such as what we are witnessing at evaluations during the RMCMI conventions cannot be stressed strongly enough. These teams are the providers of immediate rescue and medical care for victims of accidents at their respective properties. Every mining operation has the potential for very serious accidents due to immense size of equipment and mining logistics. These rescue teams must be prepared to act with the most immediate, professional and knowledgeable actions to save lives and prevent further injuries. Safety is a primary concern of every mining operation and the mine site rescue team is an integral part of that safety effort. The evaluation program is very appreciative for the financial support of the following businesses to enable this program to continue: Safety Master, Acme Welding, North American Coal, Triune. Cummins, OK Tire. Modern Industrial, The Industrial Company, Mine Safety Appliances (MSA), Biomarine, Personal Safety Enterprises, Inc., and Blattner Construction, Thank you again for your much needed assistance. Plan to be a part of next year's Mine Rescue Evaluation Program as a participant or an observer. You will be amazed at the skill levels of the Rescue Teams. See you next year! Linda G. Ash The falkirk Mining Company [ ]

Jan 1, 1993

Jan 1, 1926

By Kraig R. Naasz

Jan 1, 2008

By Michael A. Berdine

Twentymile Coal Company?s first longwall face in the late 1980?s was oriented approximately 45 degrees to the major coal cleats and 45 degrees to the primary horizontal stresses. This combination of stress and coal cleating resulted in frequent violent bursts of coal along the longwall face. The bursts created particles of sufficient size and force with the potential of causing injury to employees and occasional damage to shield components. Partial web cutting was subsequently developed in an attempt to relieve the stress on the coal face and required the shearing machine to travel to the tailgate and back for a full 36 inch web. The partial web cutting pattern is focused on first cutting the lower 90% of the seam to relieve the stress as the shearer travels from the headgate to the tailgate. The web depth during the headgate to tailgate pass is typically in the range of 70% to 80% and varies with conditions to maximize production rates. The top and bottom of the seam in the remaining 20 to 30% of the web are then cut out to allow the shields and face conveyor to advance. 100% of the web is cut at each gate end for a distance of approximately 19 shields. This paper addresses some general mine geology and the procedures and benefits of partial web cutting with respect to safety, production and maintenance on a high production longwall face.

Jan 1, 2004

By D. C. McClure

MR. McCLURE: Mr. Chairman, you sprang a surprise on me; I really came over here for a good time. Gentlemen, I am not at all qualified to pose as an expert on pulverized fuel; I have merely been making some rather interesting observations, and unfortunately at the present time, a great deal of substantial data, the technical data, I don't happen to have with me; it is still in the process of being calculated, but I will be very glad to tell you some of the observations as I have made them, and in as truthful and complete a way as I can. The question of how we would handle fuel became a very pressing subject in this new Valmont electric plant, which is now under progress. We have studied the methods of burning fuel for a number of years on different types of stokers at the existing plants in Denver; we are burning it with a natural draft chain grate and with underfeed and with forced draft chain grates, and I am very frank to confess at the present time that I have no answer as far as stokers are concerned for a better solution of the problem of burning lignite. In other words, I could not tell you that this or that is a better type of stoker to use for that coal. However, to boil the thing down, after considerable trials, the underfed stoker was chosen as the one most adaptable for the utilizing of lignite fuel if stokers are to be used. In other words, the chain grate was put aside. I might say in support of the chain grate, the prime reason for which that type of stoker was condemned, as far as lignite goes, is the initial investment charge and the large maintenance which is involved.

Jan 1, 1923

[W. R. Abbott, 11o8 First National Bank Bldg., Denver, Colo. L. E. Adams, 817 Newhouse Bldg., Salt Lake City, Utah. Herbert Addison, Big Horn Colliers Co., Denver, Colo. Richard V. Ageton, Brighton Mich. John Alexander, Dacona, Colo. C. A. Allen, 448 Capitol Bldg., Salt Lake City, Utah. David Allen, Lafayette, Colo. John Allen, Ludlow, Colo. Thomas Allen, Mt. Harris, Colo. Gerald Alley, C. F. & I. Co., Pueblo, Colo. Archie Allison, Box 562, Walsenburg, Colo. D. S. Allison, 56 W. 6th South Street, Salt Lake City, Utah. Park Allison, Box 94.0, Rock Springs, Wyo. Howard R. Allonier, care Lunkenheimer Co., Cincinnatti, Ohio. J. B. Ambler, care Ambler & Riter, Engineers, Salt Lake City, Utah. A. F. Anderson, 403 Ideal Bldg., Denver, Colo. W. K. Anderson, 4.23 East Yampa Street, Colorado Springs, Colo. Sam Andrews, 503 Pike Avenue, Canon City, Colo. Jos. Angster, Farr, Colo. William Angus, Somerset, Colo. Joseph Appleton, Ironton Engine Co., Ironton, Ohio. Victor Arnoldi, Ideal, Colo. John Arnott, Crested Butte, Colo. R. M. Atmore, Swastika, N. M. W. H. Backman, 1601 Alcott Street, Denver, Colo. Edward E. Barrett, Roberts & Schaefer Co., Chicago, Ill. G. F. Bartlett, 311 Ernest & Cranmer Bldg., Denver,, Colo. C. S. Beach, Kemmerer, Wyo. Thos. Bertram, Box 134?, Oak Creek, Colo. Charles Beuchat, Pryor, Colo. John Bevan, 1625 North Corona Street, Colorado Springs, Colo. James L. Bisch, Van Houton, N. M. Jos. Bodner, Oak Creek, Colo. A. H. C. Boissier, 302 E. & C. Bldg., Denver, Colo. John M. Bopp, 1615 Walker Bank Bldg., Salt Lake City, Utah. Edward Bottomley, Carneyville, Wyo. James V. Bowen, Union Coal and Coke Co., Denver, Colo. Alex R. Bowie, Bowie, Colo. John S. Bowie, Bowie, Colo. Wallace D. Bowie, Bowie, Colo. W. J. Bowns, Castle Gate, Utah. L. Brandenburger, 59 West Broadway, Salt Lake City, Utah. James Brennan, Primero, Colo. W. D. Brennan, Dawson, N. M. Burt B. Brewster, 704 Kearns Bldg., Salt Lake City, Utah. A. L. Brockman, Sugarite, N. M. Alex. J. Brooks, Supt. Hastings No. 5 Mine, Hastings, Colo. Edward Brooks, Sweetwater, Wyo. E. S. Brooks, Rock Springs, Wyo. D. W. Brown, Rocky Mountain Fuel Co., Denver, Colo. L. E. Brown, 1212 Walker Bldg., Salt Lake City, Utah. Mark Y. Brown, 629 East Main Street, Trinidad, Colo. H. H. Bubb, Carbon Coal and Coke Co., Cokedale, Colo. W. H. Bullock, 1052 Gas and Electric Bldg., Denver, Colo. Thomas B. Burnite, 523 Boston bldg., Denver, Colo.]

Jan 1, 1921

By George B. Pryde

Dear Sir: Yours of July 23rd, relative to my appointment on the Safety Committee in connection with the Rocky Mountain Coal Mining Institute. As you say in your letter, "The duty of this committee is to draft suggestions as to safer mining practices with the idea of preventing disasters in coal mines." Much has been written and many suggestions made on this same subject, and it is very hard to put up further recommendations than have already been made. The disasters you mention in your letter unquestionably have direct reference to coal mine explosions, which from time to time still occur in this and other countries. As far as our Western mines are concerned, you know that sprinkling and shot firing by electricity have been very extensively carried out. Notwithstanding these precautions; we have had a few rather serious disasters in the past in these mines. I do not care to place any blame or responsibility on the companies having these disasters, but it is a fact that in each and all of them, after careful investigation has been made, that the human element has had more or less bearing on the accidents happening. From most reports that we gain, either directly or indirectly, it is very evident that investigation shows after an explosion that the rules governing one or both of the above safety measures have been somewhat carelessly or negligently carried out. Much has been written and read about rock dust sprinkling, but it is questionable if this method is doing a great deal toward the eliminating of disasters. While it is true it may have the effect of preventing propagation, still I do not believe anyone claims for it a sure preventative against initial explosions. I had occasion not long ago to visit a mine, after an explosion, in which dust barriers were supposed to be hung, and from indications it was quite evident that the dust barriers had been in operation, but they did not prevent the explosion from reaching all open parts of the mine. It is also true that profuse scattering of rock dust throughout a mine would have a beneficial effect, but there is a question arises here as to whether the sprinkling by rock dust or the spraying by water, if available, is the most effective. I am satisfied that if all coal mines are kept well sprinkled and all open workings maintained in a thorough moist condition, that the biggest factor in a coal mine explosion is in this way eliminated. There is no doubt but what the use of permissible powder, particularly if shot by electricity, has had a very marked effect on the number of disasters in mines, and if this method of shooting was energetically carried out there would be a difference in the number of explosions, both minor and Major, all over the country. Some of the recent explosions have taken place where no shooting was being done, but there is no denying the fact that the other ingredient, namely, coal dust, entered in the elements very extensively. We have read and heard of hydraulic cartridges and other patents (substitutes for powder) that were being worked out for the purpose of

Jan 1, 1923

Jan 1, 1925

Jan 1, 1983

The morning session opened at 9:00 a.m. and was presided over by Carlyle F. Gronning, Chairman, Industrial Commission, State of Utah, Salt Lake City, Utah. The first speaker was John A. Fagnant, Vice President-Sales, Kemmerer Coal Company, Frontier, Wyoming. Subject - "Open Pit Coal Mining, Western States." Mr. Fagnant is a graduate of Colorado School of Mines, 1937 Degree, Metalurgical Engineer His career in the mineral industry began at the Arthur Mill of Kennecott Copper Company. For nine years he was with Allis Chalmer Company in Milwaukee, Wisconsin as a Sales Engineer in the Mining Machinery Division. Following five years in private business, he joined The Kemmerer Coal Company as a special projects engineer specializing in coal carbonization. He was assigned the job of Sales Manager in 1968 and promoted to Vice President of Sales in 1970. Member of A.I.M.M.E.

Jan 1, 1975

By Scott Dupont

Due to the scarcity of miners, and the necessity of decreasing the cost of mining, the Phelps-Dodge Corporation, Stag Canon Branch, at Dawson, [ ] New Mexico, decided to try, by various methods of mining, to increase the tonnage of coal mined per man, per day. With this in view, they first tried mining on a 250-foot face, maintaining the track at the face and using six to eight men shovel- [ ] ling. These men were able to aver age from ten to twelve tons each per, day when they were loading, but with

Jan 1, 1926

ACM Equipment Sales Co. ACM/ICM Andalex Resources, Inc. ARCO Coal Company Behre Dolbear & Company, Inc. Coastal State Energy Company Colowyo Coal Co. L.P. Commercial Testing & Engineering Company Continental Conveyor & Equipment Company Crane & Hoist Cyprus Amax Coal Company Dakota Coal Company Driltech Inc. Empire Machinery Energy West Mining Company Fleischli Oil Company Inc. Halbach & Braun Industries Hemscheidt Corporation GH Hensley Industries Ingersoll-Rand Company Jennmar Corporation Joy Technologies, Inc. K & P Sales Engineers, Inc. Kennametal, Inc. Kerr-McGee Coal Corporation LeTourneau,Inc. Long-Airdox Company Magnum Metals, Inc. McLanahan Corporation Morgantown Machine & Hydraulics Morrison Knudsen Corporation National Mining Association The North American Coal Corporation Peabody Coal Company Phillips Machine Services, Inc. Pincock Allen & Holt Powder River Coal Co. Ramsey Technology, Inc. Rust Tractor Company Salt River Project Savage Industries Inc. Stamler Corporation Tamarron Resort TerraMatrix Inc. Texaco Lubricants Company TIC (The Industrial Company Wyoming, Inc.) Trapper Mining Inc. Wagner Equipment Comp any Western Energy Company Wheeler Machinery Company

Jan 1, 1995

Jan 1, 1928