Search Documents

By Andrea Koschinsky

Numerous hydrothermal vents occur along the Earth?s oceanic spreading axes documenting the reaction of seawater with hot magmatic rocks. The circulation of seawater through the oceanic crust, the interaction with hot rocks in the crust, and the subsequent discharge of hot metal- and gas-rich fluids into the ocean have significant implications for the cycling of material and energy on Earth. Until recently, hydrothermal activity was unknown from the Mid-Atlantic Ridge (MAR) south of the Equator where the MAR is offset by about 1000 km at the St. Paul?s and Romanche fracture zones. During a British cruise in February/March 2005, the first active hydrothermal vent field was discovered on the southern MAR at 5°S. During our follow-up cruise M64/1 in April 2005, the first samples from this vent field were recovered with the ROV QUEST (Univ. Bremen) and analyzed onboard. The high-temperature vent field is situated in a water depth of 2990 m along a line of collapse pits within a large basaltic sheet flow. A diffuse, low-temperature field occurs in a jumbled sheet flow few hundred meters to the east with warm water streaming out of cavities between lava blocks. Here we show for the first time that boiling fluids of ~400°C are emanating from sulfide-bearing vents at a depth of about 3000 m at a slow-spreading Mid-Atlantic Ridge segment. Although this segment is composed of thick basaltic crust, these fluids are dominated by hydrogen relative to methane. Whereas the active chimneys consist of pyrrhotite, chalcopyrite, and isocubanite, the mineral association hematite-magnetite-pyrite occurs in the inactive chimneys suggesting that the fluids became more reducing in present times. The high hydrogen contents and the high temperature of the fluids as well as the change to more reducing conditions are most likely related to a young volcanic eruption event some 300 m east of the hydrothermal field. The presence of hematite and magnetite may indicate that the upflow zone or even the reaction zone at 5°S used to be more oxidized then at other MOR sites, where the hydrothermal fluids are commonly buffered by the pyrite-pyrrhotite-magnetite (PPM) buffer. Consequently, high iron contents and high hydrogen/methane ratios occur in high temperature fluids from basaltic host rocks rather than being restricted to ultramafic host rocks. Faunal communities at the South Atlantic vents largely resemble those from the North Atlantic vents implying that the large Equatorial fracture zones do not inhibit or obstruct faunal exchange along the Mid-Atlantic Ridge.

Jan 1, 2005

By B. J. Bluck

Diamond mega-placers, in order to rank amongst the primary diamond deposits, are defined as => 70 m carats at =>95% gem quality. There is only one mega-placer known and that is found along the coast of southwestern Africa fringing the Kaapvaal craton. Placers are classified as residual when they are left on the craton, transient when being eroded into the exit drainage and terminal. Terminal placers, in being the final depositories of diamonds off the craton, have the greatest probability of being a mega-placer and such is the case in the placer deposits near the Orange River mouth, southwestern Africa. There are four main groups of conditions leading to the development of a mega-placer: the craton, the drainage, the nature of the environment at the terminus and the timing. The craton, in its role as the producer of diamonds is significant in respect to its size, diamond-fertility, the degree to which diamonds from successive kimberlite intrusions have been retained there and their availability to the final drainage yielding the mega-placer. Cratons in being buoyant have a tendency to leak diamonds into surrounding basins but in being incompressible often have orogens converge onto them resulting in lost sediment being returned as foreland basin fills. In order to concentrate a bulk of diamonds the drainage basin has to be large with a high proportion of it on the craton. The drainage yielding the mega-placer should ideally not have been preceded by older drainage and other systems that may have robbed the craton of earlier diamonds. The exits of diamonds from the craton need to be few in order to focus on their supply and the drainage network needs to be efficient in order to remove the maximum volume of diamonds off the craton. This efficiency and the focused termination is best achieved by the rejuvenation of a pre-existing drainage network. The drainage should be young enough to yield host sediments friable enough to allow brittle diamonds to be recovered from them.

Jan 1, 2004

By RB. Pedersen, T. Barryere, E. Reeves, A. Stensland, I. Thorseth, T. Baumberger

Venting on ultraslow spreading ridges is far more abundant then previously predicted, and the discrepancy between observed and predicted vent field density may imply that non-magmatic heat sources are common along these ridges (Baker and German, 2004; Escartin et al., 2008; Rona et al., 2010; German et al., 2016). In this study we have estimated the flux from two hydrothermal vent sites situated on the slow to ultraslow spreading Mohns Ridge at the Arctic Mid-Ocean Ridge system (AMOR). The flux estimates have been made using the primordial isotope 3He in the non-buoyant plume above the Loki’s Castle vent field at the northern termination of the Mohns Ridge, and from the Jan Mayen vent fields area situated close to the southern termination of the ridge. Primordial 3He enters the oceans through degassing and mixing with hydrothermal fluids eventually to be discharged at the ocean floor primarily at hydrothermal vent sites and submarine volcanic eruptions (e.g. Clarke et al., 1969; Lupton and Craig, 1981; Lupton, 1998). Once introduced into the water column the concentration will only decrease by dilution due to its conservative behavior in the water column. Water column samples were collected using a CTD (conductivity, temperature, depth) probe (911plus Seabird) with a Niskin water bottle rosette. The water column above the Jan Mayen vent fields (JMVF) was sampled in the years 2006, 2011, 2012 and 2013 (82 samples) and the water column above the Loki’s Castle vent field was sampled in the years 2007, 2008 and 2009 (116 samples).

Jan 1, 2018

By Satya Nandan

• A review of the structure and mandate of the Authority – its main functions. • The different types of mineral resources found in the deep seabed – their global distribution. • The Development of Regulations for Prospecting and Exploration of Polymetallic Nodules, Cobalt-Rich Crusts and Polymetallic Sulphides including environmental regulations and guidelines. • Early constraints for deep seabed mining – Improving conditions for mining – Future prospects for mining.

By Will Roberts, M. E. Williamson

After verification of methodology and testing of prototype systems during 2005/06, Nautilus Minerals expanded their Papua New Guinea (PNG) operations to a full commercial exploration program in 2007. Included was the deployment of sensors and survey systems to locate, characterize and verify massive sulfide deposits with potential as mine sites within the tenements held by Nautilus in PNG. This presentation discusses some of the gear developed and operated during the 2007 PNG investigation.

By Hunsoo Choi, Sang-Mo Koh

Manganese nodule, the aggregate of fine grained manganese oxide minerals, is very brittle and fragile. In exploitation of manganese nodule, manganese nodules are easily broken into small pieces or powder during collecting and lifting from the sea floor. The broken manganese nodule under few millimeters and bottom sediment pumped up with manganese nodule affect to the lifting process. In this study, we tried to understand the physical properties of the powdered manganese nodule and bottom sediment, and to know the effect which may be rised to the actual mining of manganese nodules.

By Akira Usui, James R. Hein, Rachel Dunham

Ferromanganese crusts are found on most hard-rock substrates in the deep ocean (800-3,000 m). Their distributions on seamounts are complex and controlled by a wide-variety of factors including seamount morphology, current patterns, mass wasting, substrate rock type and age, subsidence history, and others. However, the development of this potential resource ultimately depends on this distribution, as well as on the small-scale topography, grade, and tonnage. The parameters that will ultimately be used to define a mine site are unknown, but reasonable assumptions based on 25 years of data collection can be used to bracket likely permissive characteristics.

By Kokichi Iizasa

Modern Kuroko-type deposits have been much reported in submarine calderas and cauldrons in the EEZ of Japan since 1988. Some of them have been found based on heavy mineral analysis of sediments in which sulfide particles may be derived from hydrothermal sources in the ambient areas. From the end of August to early September 2007, in the middle Izu-Ogasawara arc south of Tokyo, ROV expeditions were carried out in submarine calderas in order to examine mineralogical features between intact heavy particles spouting out from sulfide chimneys and heavy minerals such as sulfides in sediments around sulfide mounds in Kuroko-type deposits, and to find more newly formed hydrothermal sulfide fields in those areas. Some preliminary results from the ROV expeditions are reported here.

Oct 15, 2007

By Virginie Tilot de Grissac

This project funded by Government of Flanders (Belgium) and coordinated by the Intergovernmental Oceanographic Commission proposes to draw recommendations for conservation of the biodiversity and for minimizing the impact of future nodule mining from the description of the referential state of suprabenthic megafaunal assemblages within a nodule ecosystem in the Clarion-Clipperton Fracture Zone (CCFZ). The description of this specific ecosystem is based on the analysis of about 200 000 photographs and some 55 hours of film collected by French and American exploratory cruises. The video and hotographic sampling has been achieved by means of different towed and remote control devices designed for Ifremer and NOAA including the manned submersible “the Nautile.”

Aug 24, 2006

By Michael Johnston

Nautilus Minerals is exploring for high-grade gold, silver, copper, and zinc-rich submarine massive sulphide deposits (SMS) within the territorial waters of the sovereign state of Papua New Guinea. Work to date has shown that these systems contain spectacularly high metal grades. To date a total of 88 surface sulphide grab samples have been collected from Nautilus’ Solwara 1 Prospect within EL 1196 in the Manus Basin, returning average grades of 15.5 g/t gold, 191g/t silver, 10.8% copper, and 4.7% Zn. Drilling in January/February 2006 confirmed the presence of this high grade system, with sulphide intersections up to 19m below the sea floor, with a best intersection of 11.6m at 9.1 g/t Au and 13.1% Cu.

By Timothy F. McConachy, Christopher J. Yeats, Ray Binns

Various kinds of sediment-hosted polymetallic sulfide deposit are known on land in ancient marine sequences, many tending to be larger and more valuable than massive sulfide deposits genetically associated with volcanic host rocks. Often such deposits are attributed to subhalative or shallow sub-seafloor precipitation processes, and structural control by faulting is commonly evident. Apart from the famous but anomalous Red Sea metallic oozes and several NE Pacific sites (Middle Valley, Escanaba Trough, Guaymas Basin), however, modern analogs of the sediment-hosted polymetallic sulfide category are lacking. Some deposits hosted by volcaniclastic rocks, such as JADE (Okinawa Trough) and Suzette (Eastern Manus Basin) are strictly sediment-hosted, but their formation is associated with the igneous activity and they are better considered a variant of the more abundant volcanic-associated polymetallic sulfide deposits.

Aug 24, 2006

By Hjalmar Thiel

Issues of deep-seabed mining are discussed since four decades and extensive efforts have been invested in oceanographic studies related to environmentally sound harvesting of polymetallic nodules. Because mining on the deep seafloor seems to range from large-scale, two-dimensional dredging or scooping up of the ore from the uppermost surface sediment layer to more localized drilling or deeper digging into a three-dimensional ore body, it appears to be justified to reconsider some concepts for environmental impact evaluation. Based on the experience gained during preceding years in environmental studies related to polymetallic nodule mining, some interrelated hypotheses and proposals will be presented. It is suggested that these proposals be considered in future plans for environmental impact evaluation and that observations on community re-establishment be conducted before massive sulphide mining or other ore extractions enter the commercial mining phase.

Aug 24, 2006

By H. Oda, L. E. Fong, K. K. McBride, B. P. Weiss, F. J. Baudenbacher, A. Usui

Fine-scale dating is a key parameter in characterizing the growth history of hydrogenetic ferromanganese crusts. We once compared several dating methods, micropaleontological (calcareous nanofossil), radiometric (10/9Be), and paleomagnetic (step-wise measured inclination) methods on single samples, but these independent methods were not consistent with each other (Joshima & Usui, 1999). For example, a 4-cm thick crust was dated as 3Ma by the fossil-paleomagnetic combined method, while it dated older than 5.5 Ma by Be-10 dating. This discrepancy suggests a question if the Be-10 radiometric method can give us false ages or growth rates (Usui et al., 2002) because of post-depositional change, diffusion or other reasons. In order to answer the question, we conducted ultra-fine magnetostratigraphy with a SQUID microscope on the same hydrogenetic Mn crust sample. Rock magnetic measurements revealed that the main magnetic mineral is well dispersed single domain grains, which is typical to magnetite but not yet specified (Oda, 2005).

Aug 24, 2006

By In Kwon Um

The XRF Core-Scanner system performs non-destructive analysis of elements from Mg to U, in concentrations of ppm levels on split cores with digital images. Using the AVAATECH XRF Corescanner system, we conducted high resolution element analysis of deep sea sediment cores from Clarion-Clipperton fracture zone of the northeastern Pacific to reveal recent environmental changes. Comparison of data estimated by the XRF core scanner with ICP-AES showed relatively weak correlation coefficients except Mn contents. Down-core variations of most elements seem to be matched with each other and reflect changes of sediment colors. Especially Mn/Al ratio significantly change at distinct color boundaries. The variations of Mn/Al ratio with sediment colors are suggestive of changes in redox condition and further divided into two types probably affected by activities of benthic organisms. Be isotope age datings of select core (BC08-02-13) indicate that the color boundaries are approximately coincident with late Pliocene and Pleostocene also early Pliocene and late Pliocene boundary. Keywords: XRF core scanner, High resolution, C-C zone

Jan 1, 2011

By David A. Clague, James R. Hein, Robert W. Embley, Robert C. Vrijenhoek, Randolph A. Koski

We report preliminary results for a group of unique samples collected with MBARI’s ROV Tiburon on August 12, 2005. The samples were collected from the East Blanco Depression (EBD) diffuse-flow hydrothermal field, which was determined in a previous study to cover an area of at least 100 m by 80 m (Hein et al., 1999). The survey reported on here extends that field to more than 1500 m in an approximately N-S direction. The EBD, a pull-apart basin, occurs near the western end of the Blanco Fracture Zone (BFZ), which connects the Juan de Fuca and Gorda Ridge spreading centers (Fig. 1). The samples were collected from a waterdepth range of 3343-3380 m.

Aug 24, 2006

By Winston Rocher Anda

Traditionally, mining activities have been developed in firm land, but technological advances and human needs have opened in the last year?s new opportunities in the maritime field. This has happened not only in the oil or hydrocarbons industries, but also in relation to the exploration or exploitation of other minerals, metallic and non-metallic. This has forced several countries to complement or create legal rules that make possible its own development and the International Law, through the United Nations Convention on the Law of the Sea, to regulate this activity in the space of its own, the calling area. Chile, as country with a long experience in mining and great advances in large deposits exploitation, possesses a special juridical frame that regulates this economic activity according if it is the geographical or territorial area in which is realizes, and it has been complemented lately with the international normative.

Jan 1, 2011

By Cheng Xiangzhou

The China's Pioneer area includes two parts. The topography in the western part is very different from that in the eastern one. The distribution of the manganese nodules in these two regions differs correspondingly China Ocean Mineral Resources Research and Development Association (COMRA) will take appropriate measures so that the next development will be adapted to the features of its potential minable area.

Jan 1, 1996

By Pierre-Yves Morvan

One of the numerous challenge for underwater mining is the positioning. This paper describes an architecture for the integration of an Ultra Short BaseLine (USBL), an Acoustic Synthetic BaseLine (ASBL) operating in Sparse Array mode and a Doppler Velocity Log (DVL) closely coupled with an Inertial Navigation System (INS) for precise subsea positioning in severe environments. By using such architectures, the INS can help to reduce the noise on the measurements coming from acoustic sensors. Another advantage is the capability to reduce the number of required transponders on the seabed, and as a consequence, reduce the time for the deployment and calibration of each transponder. The paper further describes sea-trials performed to assess the ability of a complete positioning system to provide decimetric positioning precision even with a single beacon deployed in the navigation area.

Jan 1, 2017

By Akira Usui

The small-scale observations, mapping, sampling, and in-situ experiments have been carried out since 2009 using JAMSTEC ROVs at some model seamounts in the Northwestern Pacific seamounts. Laboratory analysis on mineralogy, chemistry, chronology indicated a continuous slow precipitation since the Middle Miocene, at water-depths 1-6 km, and the modern hydrogenetic precipitation even in the oxygen minimum zones. Thus the variability in abundance and grade of the deposits on regional, small and microscopic scales are determined by geological, geochemical, and hydrological conditions, resulting in the stacked piles of tiny precipitates from the seawaters.

Jan 1, 2018

By Sup Hong

Herein, concept designs of two different types of mining robots are concerned, which are aimed for developments of deep seabed mineral resources: polymetallic nodules (PMN) and seabed massive sulfides (SMS), respectively. Continuous mining concepts are presented based on technical and environmental feasibility, where the environmental and functional differences for commercial productions are investigated. Needs and roles of versatile mining robots are explained as a key of continuous mining system. The functional requirements and design characteristics of mining robots to satisfy the top requirements from customers are described comparatively. Schemes of axiomatic design and quality function deployment (QFD) are utilized: functional requirements (FR) are defined, technical requirements (TR) are figured out, design parameters (DP) are derived, and degrees of importance of design parameters are evaluated. Analogy and discrepancy in remote operation methods are put side by side. A pilot scale mining robot for PMN and a commercial scale one for SMS are suggested in form of concept designs. PMN mining robot is shaped as a multiple configuration of unit robot modules in side dimension, in which the unit robot module consists of two tracks and two pick-up modules. SMS mining robot is based on a four-tracked vehicle. Main platform is mounted on the vehicle through turn-table. Excavation device consists of two-articulated boom and cutter tool. Crushing-and-pumping units are placed same in both robot platforms.

Jan 1, 2011