RI 9431 - Development and Testing of a Computer-Assisted Remote-Control System for the Compact Loader-Trammer (c9fe9ae1-e51b-474a-8ffc-070d36b0f639)

- Organization:
- The National Institute for Occupational Safety and Health (NIOSH)
- Pages:
- 16
- File Size:
- 3308 KB
- Publication Date:
- Jan 1, 2010
Abstract
A prototype mucking machine designed to operate in narrow-vein stopes was developed by Foster-Miller, Inc., Waltham, MA, under contract with the U.S. Bureau of Mines. The machine, called a compact loader-trammer, or minimucker, was designed to replace slusher muckers in narrow-vein underground mines. The minimucker is a six-wheel-drive, skid-steered, load-haul-dump (LHD) machine that loads muck at the front with a novel slide-bucket system and ejects it out the rear so that the machine does not have to be turned around. To correct deficiencies of the tether-remote-control system, a computer-based, radio-remote-control system was retrofitted to the minimucker. Initial tests indicated a need to assist the operator in guiding the machine in narrow stopes. An automatic guidance system that used ultrasonic ranging sensors and a wall-following algorithm was installed. Additional tests in a simulated test stope showed that these changes improved the operation of the minimucker. The design and functions of the minimucker and its computer-based, remote-control system are reviewed, and an ultrasonic-sensor-based guidance system is described.
Citation
APA:
(2010) RI 9431 - Development and Testing of a Computer-Assisted Remote-Control System for the Compact Loader-Trammer (c9fe9ae1-e51b-474a-8ffc-070d36b0f639)MLA: RI 9431 - Development and Testing of a Computer-Assisted Remote-Control System for the Compact Loader-Trammer (c9fe9ae1-e51b-474a-8ffc-070d36b0f639). The National Institute for Occupational Safety and Health (NIOSH), 2010.