RI 4082 Use of Molten Lead as Quenching Medium in Carbothermic Production of Magnesium

The National Institute for Occupational Safety and Health (NIOSH)
P. P. Zapponi M. J. Spendlove
Organization:
The National Institute for Occupational Safety and Health (NIOSH)
Pages:
7
File Size:
346 KB
Publication Date:
Jun 1, 1947

Abstract

"INTRODUCTION In carbothermic processes for the production of magnesium, magnesium oxide is reduced by carbon according to the following equation:(1) MgO + C = Mg(g) + CO.The reaction is virtually complete at temperatures above 2,000° C. but reverses rapidly at somewhat lower temperatures. To produce magnesium by this reaction, therefore, it is necessary to cool the gas very rapidly to a temperature at which the rate of the reverse reaction becomes negligible. Several media for quenching the gas have been proposed, among which are hydrogen, natural gas, liquid hydrocarbons, and molten metals of low melting point.The results of a preliminary investigation on the use of molten lead as the quenching medium are summarized in this report. The work was done in 1941, when the threat of war made it imperative to investigate every process that offered possibilities for rapid expansion of domestic production of magnesium. Although the results were encouraging, other processes appeared to offer better prospects for immediate wartime development, so the work was not continued. Shortly before the investigation was completed, several patents on the use of low-melting metals for absorption of magnesium vapors appeared, 4/"
Citation

APA: P. P. Zapponi M. J. Spendlove  (1947)  RI 4082 Use of Molten Lead as Quenching Medium in Carbothermic Production of Magnesium

MLA: P. P. Zapponi M. J. Spendlove RI 4082 Use of Molten Lead as Quenching Medium in Carbothermic Production of Magnesium. The National Institute for Occupational Safety and Health (NIOSH), 1947.

Export
Purchase this Article for $25.00

Create a Guest account to purchase this file
- or -
Log in to your existing Guest account