Production Engineering - Pumping Deep Wells in the Seminole Field, Oklahoma

The American Institute of Mining, Metallurgical, and Petroleum Engineers
M. J. Kirwan K. A. Covell
Organization:
The American Institute of Mining, Metallurgical, and Petroleum Engineers
Pages:
25
File Size:
940 KB
Publication Date:
Jan 1, 1929

Abstract

This paper covers a brief discussion of pumping 38° to 41° gravity oil from Wilcox sand wells ranging in depths from 4000 to 4900 ft. in the Seminole field, Oklahoma. As recently as a year ago it was the general belief among Seminole operators that most wells in that district could not be successfully or economically pumped. Also the idea was prevalent at that time that the crookedness of the rotary holes would cause a large amount of mechanical trouble and the use of the air-gas lift would leave the wells depleted with sand conditions and fluid levels unfavorable for pumping. At that time it was predicted that wells would be abandoned when the economic flowing and swabbing period was reached. Contrary to these beliefs it has been demonstrated that wells can be profitably pumped to limits as low as 10 bbl. of oil per day where conditions are favorable. The Serllinole field, unusual in its rapid development, has served as an experimental laboratory for many oil field pumping devices with which this paper will not concern itself. Discussion will be confined to equipment and methods in general use throughout the field. The outstanding features of equipment and pumping operations covered in this paper may be summarized as follows: 1. Pumping equipment from the standpoint of prime movers, energy cost, power transmission equipment, derricks, counterbalances, beam hangers, tubing, sucker rods, pumps, etc. 2. Pumping problems peculiar to the Seminole field, including the proper time at which to change from air-gas lift flowing to pumping. Pumping Equipment There have been no basic changes in pumping equipment in the past 20 years with the exception of some refinements in design brought about by the demand for equipment suitable for pumping deep wells. Results of research in the heat treatment of metals and progress made by the American Petroleum Institute in standardization of equipment, together with the cooperation of oil field equipment manufacturers, have
Citation

APA: M. J. Kirwan K. A. Covell  (1929)  Production Engineering - Pumping Deep Wells in the Seminole Field, Oklahoma

MLA: M. J. Kirwan K. A. Covell Production Engineering - Pumping Deep Wells in the Seminole Field, Oklahoma. The American Institute of Mining, Metallurgical, and Petroleum Engineers, 1929.

Export
Purchase this Article for $25.00

Create a Guest account to purchase this file
- or -
Log in to your existing Guest account