Part IV – April 1968 - Communications - Discontinuous Precipitation in Cu-1.79 Wt Pct Be
    
    - Organization:
 - The American Institute of Mining, Metallurgical, and Petroleum Engineers
 - Pages:
 - 2
 - File Size:
 - 249 KB
 - Publication Date:
 - Jan 1, 1969
 
Abstract
THE equilibrium y phase in Cu-Be alloys forms by discontinuous precipitation, the new phase nucleating at the grain boundaries and growing into grains on both sides of the boundary. When the alloy is aged above 500°C, however, growth may take place into only one of the grains.1'2 In A1-Ag alloys it is known that the precipitate has the same orientation as the grain in which no growth takes place.3, 4 This was confirmed in the present investigation on a Cu-Be alloy.    A Cu-1.79 wt pct Be alloy was solution-treated at 810°C for 2+ hr, quenched into water at O°C, and aged at 600°C for 1 hr in a salt bath. The specimen was thinned by chemical polishing and electropolishing at room temperature in a solution of H3PO4 saturated with CrOs. The foil produced was examined in a JEM 150 electron microscope operating at 150 kv.    Fig. 1 shows precipitates growing on only one side of the grain boundary. The black platelike precipitates were identified as the y phase. Electron dif-
Citation
APA: (1969) Part IV – April 1968 - Communications - Discontinuous Precipitation in Cu-1.79 Wt Pct Be
MLA: Part IV – April 1968 - Communications - Discontinuous Precipitation in Cu-1.79 Wt Pct Be. The American Institute of Mining, Metallurgical, and Petroleum Engineers, 1969.