Papers - Underground Mining - Influence of Rate of Advance and of Time Factor in Support of Active Workings in Bituminous Coal Mines (T. P. 933, with discussion)

The American Institute of Mining, Metallurgical, and Petroleum Engineers
L. E. Young
Organization:
The American Institute of Mining, Metallurgical, and Petroleum Engineers
Pages:
14
File Size:
1269 KB
Publication Date:
Jan 1, 1938

Abstract

The purpose of this paper is to start a discussion on: (I) methods of supporting the immediate roof, particularly of local areas of poor roof, during the mechanical loading of coal; (2) methods of increasing the rapidity of the movement of the mining faces so that, without the use of cribs, jacks, park walls, and filling, there will be no danger to men, equipment, and working places from the subsidence of the overlying strata. In the Pittsburgh district the application of mechanical loading devices in mines working in the Pittsburgh seam has been retarded by the difficulties of holding and handling the draw slate. Normally the thickness of this slate averages about 8 in. but the hardness varies, and a cut of coal cannot always be loaded without placing posts or crossbars to support the slate. Locally, the slate may be thicker and special methods of support may be required. If crossbars are placed to hold the slate when the coal averages 5 ft. in thickness, the standard methods of transporting the coal cannot be followed, and the use of conveyors may be desirable. Very little information is available on the effect of increasing the rate of movement of advancing or retreating break lines or longwall faces. A few British publications have presented some data but all such data relate to longwall faces that have moved not more than 6 ft. a day. The most rapid rate of movemerit of longwall faces in Germany is 6 ft. per day. In the ordinary hand-loading mine in western Pennsylvania break lines on full retreat will move about 2 ft. per day. If loading machines are used under similar conditions the rate of retreat may reach 4 ft. per day. In a mine where coal is loaded by hand on conveyors three shifts per day, the rate of retreat has ranged from 11 to 16 ft. per day, with an average of 13 ft. If mobile loading machines could be used to load on conveyors on break lines, the rate of retreat should be increased substantially During 1935 and 1936, the United States Bureau of Mines, under a cooperative agreement with the Pittsburgh Coal Co., carried on studies of roof movement at Montour To. 10 mine. The work war done urider the direction of Mr. H. P. Greenwald, Supervising En neer, Experi-
Citation

APA: L. E. Young  (1938)  Papers - Underground Mining - Influence of Rate of Advance and of Time Factor in Support of Active Workings in Bituminous Coal Mines (T. P. 933, with discussion)

MLA: L. E. Young Papers - Underground Mining - Influence of Rate of Advance and of Time Factor in Support of Active Workings in Bituminous Coal Mines (T. P. 933, with discussion). The American Institute of Mining, Metallurgical, and Petroleum Engineers, 1938.

Export
Purchase this Article for $25.00

Create a Guest account to purchase this file
- or -
Log in to your existing Guest account