Effect Of Dissolved Gas Upon The Viscosity And Surface Tension Of Crude Oil

- Organization:
- The American Institute of Mining, Metallurgical, and Petroleum Engineers
- Pages:
- 13
- File Size:
- 457 KB
- Publication Date:
- Jan 12, 1926
Abstract
IN the course of the experimental and development work of Henry L. Doherty in an endeavor to obtain an increased yield of oil from oil-bearing sands, it was Mr. Doherty's claim and contention that oil in an undisturbed pool was different in character and behavior than, the same oil when raised to the surface of the earth, and that the gas dissolved in the oil caused a marked reduction in its viscosity and surface tension. Prior to 1924 no information to support this contention could be found in the literature or by a discussion of the subject with technical men in Government and private laboratories. So far as could be ascertained no experimental work had been carried on to indicate that Mr. Doherty's claim was either right or wrong. All parties consulted agreed that the viscosity of the oil would be affected by gas dissolved therein to the extent that natural gasoline was present in the gas, but so far as could be determined any additional effect of the natural gas was unknown. Accordingly, it was necessary to devise equipment and carry on experiments which would either prove or disprove Mr. Doherty's contention or claim. Such apparatus was built under Mr. Doherty's direction and experiments were carried on to determine definitely the viscosity and the surface tension of the crude oils which contain dissolved gases under different pressures. The results of the experimental work carried on have proved that the claim and contention of Mr. Doherty were correct in every particular, as will be seen from the discussion of the subject and the data contained in this paper.
Citation
APA:
(1926) Effect Of Dissolved Gas Upon The Viscosity And Surface Tension Of Crude OilMLA: Effect Of Dissolved Gas Upon The Viscosity And Surface Tension Of Crude Oil. The American Institute of Mining, Metallurgical, and Petroleum Engineers, 1926.