Discussion ?V? - System at Berwind

MR. STOUT: The picture shows the plan of the "V"-system as worked at Berwind mine, in a small strip of coal adjacent to the 4th right entry. The dotted line (indicating) show the position of the break rows as set for each of the three consecutive breaks. In two cases the break rows failed to function properly and as a result, the roof caved along the points of the "V's" as well as back along the faces a short distance. This affected the ventilation to a certain extent, but was remedied immediately by cutting through the points near the cave and setting additional timbers. At the present time we are putting in the break row of heavy red spruce props, making the row straight instead of curved as is shown in the picture; in this way we believe we can better control the breaks. The three "V" entries were driven up 14 feet wide, for a distance of 260 feet without cross-cuts. A very neat and substantial line brattice was carried up each entry as the places advanced. The principal factors in determining the success of this system are ventilation, roof control, and transportation. We are well pleased with the results from these three "V" places and now have four other places, about 500 feet to the west of these, driving at the present time in which we hope to get still better results. A MEMBER: What centers did you use there? MR. STOUT: We used 70 feet. This may be increased or decreased according to local conditions. MR. F. W. WHITESIDE (Chief Engineer, Victor-American Fuel Co.) Will you please describe roughly how your cars are handled? MR. STOUT: Cars are brought from the parting and pushed up along the faces by a storage battery locomotive. The faces are about 70 feet long and we found that five or six cars can be loaded and transported very conveniently. It is important to get a quick exchange of cars, and in this way we were able to keep the shovelers busy at all times. A MEMBER: What is the grade in your "V" entries? MR. STOUT: Five per cent in favor of the loaded trip. A MEMBER: What is the angle of your "V" faces? MR. STOUT: The angle at the throat is 45 degrees. MR. SAMUEL ANDREWS: In what direction does the air travel? MR. STOUT: The air travels down the dip entries and is deflected up the first "V" entry, and travels along the points, and returns down the last entry. There is no more difficulty in ventilating "V" faces than in ventilating rooms, providing the points are kept open. A MEMBER: What amount of air do you have in that section? MR. KAISER (Superintendent, Berwind Mine): Eighteen thousand cubic feet per minute. MR. ANDREWS: It is necessary, Mr. Stout, to brattice these places?