A Fluxing Gas - Producer For Making Heating Gas

The American Institute of Mining, Metallurgical, and Petroleum Engineers
W. J. Taylor
Organization:
The American Institute of Mining, Metallurgical, and Petroleum Engineers
Pages:
2
File Size:
96 KB
Publication Date:
Jan 1, 1881

Abstract

In making heating gas with anthracite coal for roasting ore during the past few years, I have tried many forms of gas generators. So far, the most successful and satisfactory one has been what we call a fluxing producer, which is simply a small cupola or blast furnace, in which we charge with the coal, say, 30 or 40 per cent. of basic blast-furnace cinder, to unite, when melted, with the ash or earthy matter in the coal, and carry it off as cinder. The producer we have in use at Chester, N. J., has more of the lines of a blast furnace than a cupola, the hearth being 24 inches diameter and 24 inches high. It then enlarges on an angle of about 25 degrees from a perpendicular to 4 feet, and then is drawn into 3 feet on top ; total height, 12 feet. We use one water coil-tuyere 12 inches above the bottom, and blow through a 1 1/2 - inch nozzle. The depth of coal above the tuyere averages about 6 feet. The producer-is blown with
Citation

APA: W. J. Taylor  (1881)  A Fluxing Gas - Producer For Making Heating Gas

MLA: W. J. Taylor A Fluxing Gas - Producer For Making Heating Gas. The American Institute of Mining, Metallurgical, and Petroleum Engineers, 1881.

Export
Purchase this Article for $25.00

Create a Guest account to purchase this file
- or -
Log in to your existing Guest account