Experimental and Numerical Methodology Assessment of Load Transfer Capacity of Bolts

Aziz, Naj
Organization: International Conference on Ground Control in Mining
Pages: 9
Publication Date: Jan 1, 2005
n Australia, the common method of laboratory testing of bolt for load transfer capacity determination is by short encapsulation push testing. Some concerns are raised about the validity of the test methodology, as the method does not reflect on the actual load transfer characteristics of bolt in real field situation. Thus, laboratory testes were carried out to examine the load transfer mechanisms of bolts in both the push and pull conditions. Tests were conducted by shearing a short resin encapsulated bolt out of a cylindrical steel sleeve. Three types of bolts with different surface profile configurations were tested. The study was complemented with numerical simulation of the test methods. Irrespective of bolt type the average shear load and shear stress values were found to be greater in push test, and the displacement at peak shear load was greater in pull test. The average shear stifhess values were greater in push test. The numerical simulation of the bolts provided a clear understanding of the stresses and strains generated by different bolt profiles during both the pull and pull testing process, thus allowing a better appreciation of the load transfer mechanism process.
Full Article Download:
(8407 kb)


Additional chapters/articles from the SME-ICGCM book 24th International Conference on Ground Control in Mining (ICGCM) 24th

Keynote Address at the 23rd International Conference on Grou
Analysis and Design of Rib Support (ADRS) a Rib Support Desi
Evaluation of the Impact of Standing Support on Ground Behav
Half a Career Trying to Understand Why the Roof Along the Lo
Forecasting Roof Falls with Monitoring Technologies - A Look
Analysis of Seismic Source Parameters of Roof Falls in Time
A System to Provide Early Warning on Impending Goaf
Outcomes of the Landmark Longwall Automation Project with Re
Application of Phenolic Foam in Longwall Mining
Multiple Seam Mining Interactions: Case Histories from the H
Analysis of Entry Stability Associated with Multi-seam Minin
Failure Mechanics of Multiple Seam Mining Interactions
Engineering Classification of Ultra-close Multiple Seam Roof
Definition of Ultra-close Multiple-seams and its Ground Pres
Depillaring and Roof Bolting Practices at Quinsam Coal Mine
Seam Structure - An Important Criterion for Coal Pillar Desi
Mitigating Longwall Subsidence Effects on a Large Industrial
Impacts of Longwall Mining on Hydrology, Soil Moisture, and
Basics on the Dimensioning and the Extraction of Shaft Safet
Modeling the Arc-effect of a Coal Mine Roof
Recent Advances in Numerical Simulation of Cutter Roof Failu
Test Method for Assessing Water Degradation Potential of Coa
Geotechnical Strata Characterisation Using Geophysical Boreh
A Method for Quantitative Void/Fracture Detection and Estima
Implication of Highly Anisotropic Horizontal Stresses on Ent
Ground Control of a Mine Stope in Weak Rocks Subjected to Hi
Analysis of Highwall Mining Stability - The Effect of Multip
Highwall Mining in a Multiple-seam, Western United States Se
The Slope Stability Assessment in the Wall Overlooking the S
Numerical Modeling as a Tool to Predict Pillar Condition and
Development and Testing of a New Roof Prop
Stability Mapping System
Using Foaming Grout to Stabilize a Ventilation Raise in Very
Roof Control and Roadway Support Design in the #9 Coal Seam,
Non-confirmation Mathematics for Wall Rock Classification fo
The Influence of the First Layer Thickness of Immediate Roof
Studies on Distribution Pattern of and Methane Migration Mec
Development of a New Roof Bolt Technology to Improve Gate- R
Improved Pull out Strength of Fully Grouted Roof Bolts throu
Experimental and Numerical Methodology Assessment of Load Tr
An Investigation into the Support Systems in South African C
Investigation of Fully Grouted Roof Bolts Installed Under In
Development of the Laboratory Short Encapsulation Pull Test
A Resin Quality Testing Procedure for Collieries
Determination of Load Transfer Characteristics of Gloved Res
Fully Grouted Torque Tension Bolts Successfully Support Pitt
Shear Bond Characteristics in Grouted Cable Bolts
Overcoring Techniques to Assess in Situ Corrosion of Galvani
Development of a Laboratory Facility for Testing Shear Perfo
Mechanical Response of Split-Set Rock Bolts in Squeezing Gro
Mechanisms of Rib Sloughing and Methods of Controlling Thick
Supporting Method of the Bolted Strata in Large Deformation
Assessment of Ground Conditions Near a Mine Portal Using Gro
Detection of Abandoned Mines and Air Passages/Burning Center
Detecting Abandoned Coal Mine Entries by High Resolution Ear