Multiple Seam Mining Interactions: Case Histories from the Harris No. 1 Mine

Chase, Frank E.
Organization: International Conference on Ground Control in Mining
Pages: 8
Publication Date: Jan 1, 2005
The Harris No. 1 Mine, located in Boone County, WV, has been longwalling the Eagle Coalbed for over 30 years. Harris has experienced numerous interactions associated with the extensive room-and-pillar and longwall mining operations which have been conducted in the overlying No. 2 Gas Coalbed. The problems have included roof falls, excessive rib sloughage, and gateroad and bleeder entry closure. A detailed evaluation of the multiple seam experiences at Harris No. 1 Mine was conducted as part of the National Institute for Occupational Safety and Health (NIOSH) nation-wide multiple seam mining case history data base. One observation from the Harris gateroad case histories was that smaller, critically loaded, upper seam pillars seemed to cause more severe ground conditions than did wider pillars. The LaModel program was used to investigate this supposition, and the results confirmed that "critical" sized pillars do transmit the highest amounts of stress to adjacent seams. In addition, the data suggest that the probability of a major multiple seam mining interaction increases when the depth of cover is 1,000 ft or greater and when the Eagle seam pillars have a Analysis of Longwall Pillar stability factor less than 1.50.
Full Article Download:
(5049 kb)


Additional chapters/articles from the SME-ICGCM book 24th International Conference on Ground Control in Mining (ICGCM) 24th

Keynote Address at the 23rd International Conference on Grou
Analysis and Design of Rib Support (ADRS) a Rib Support Desi
Evaluation of the Impact of Standing Support on Ground Behav
Half a Career Trying to Understand Why the Roof Along the Lo
Forecasting Roof Falls with Monitoring Technologies - A Look
Analysis of Seismic Source Parameters of Roof Falls in Time
A System to Provide Early Warning on Impending Goaf
Outcomes of the Landmark Longwall Automation Project with Re
Application of Phenolic Foam in Longwall Mining
Multiple Seam Mining Interactions: Case Histories from the H
Analysis of Entry Stability Associated with Multi-seam Minin
Failure Mechanics of Multiple Seam Mining Interactions
Engineering Classification of Ultra-close Multiple Seam Roof
Definition of Ultra-close Multiple-seams and its Ground Pres
Depillaring and Roof Bolting Practices at Quinsam Coal Mine
Seam Structure - An Important Criterion for Coal Pillar Desi
Mitigating Longwall Subsidence Effects on a Large Industrial
Impacts of Longwall Mining on Hydrology, Soil Moisture, and
Basics on the Dimensioning and the Extraction of Shaft Safet
Modeling the Arc-effect of a Coal Mine Roof
Recent Advances in Numerical Simulation of Cutter Roof Failu
Test Method for Assessing Water Degradation Potential of Coa
Geotechnical Strata Characterisation Using Geophysical Boreh
A Method for Quantitative Void/Fracture Detection and Estima
Implication of Highly Anisotropic Horizontal Stresses on Ent
Ground Control of a Mine Stope in Weak Rocks Subjected to Hi
Analysis of Highwall Mining Stability - The Effect of Multip
Highwall Mining in a Multiple-seam, Western United States Se
The Slope Stability Assessment in the Wall Overlooking the S
Numerical Modeling as a Tool to Predict Pillar Condition and
Development and Testing of a New Roof Prop
Stability Mapping System
Using Foaming Grout to Stabilize a Ventilation Raise in Very
Roof Control and Roadway Support Design in the #9 Coal Seam,
Non-confirmation Mathematics for Wall Rock Classification fo
The Influence of the First Layer Thickness of Immediate Roof
Studies on Distribution Pattern of and Methane Migration Mec
Development of a New Roof Bolt Technology to Improve Gate- R
Improved Pull out Strength of Fully Grouted Roof Bolts throu
Experimental and Numerical Methodology Assessment of Load Tr
An Investigation into the Support Systems in South African C
Investigation of Fully Grouted Roof Bolts Installed Under In
Development of the Laboratory Short Encapsulation Pull Test
A Resin Quality Testing Procedure for Collieries
Determination of Load Transfer Characteristics of Gloved Res
Fully Grouted Torque Tension Bolts Successfully Support Pitt
Shear Bond Characteristics in Grouted Cable Bolts
Overcoring Techniques to Assess in Situ Corrosion of Galvani
Development of a Laboratory Facility for Testing Shear Perfo
Mechanical Response of Split-Set Rock Bolts in Squeezing Gro
Mechanisms of Rib Sloughing and Methods of Controlling Thick
Supporting Method of the Bolted Strata in Large Deformation
Assessment of Ground Conditions Near a Mine Portal Using Gro
Detection of Abandoned Mines and Air Passages/Burning Center
Detecting Abandoned Coal Mine Entries by High Resolution Ear