Highwall Monitoring to Combat Rockfall Accidents at Opencast Collieries

Latilla, John
Organization: International Conference on Ground Control in Mining
Pages: 9
Publication Date: Jan 1, 2002
Following its introduction on underground collieries, the mandatory Code of Practice to Combat Rockfall Accidents (CoP) was applied to all opencast operations of lngwe Collieries (the South African division of BHP Billiton Energy Coal). The CoP includes, but is not limited to, requirements to assess hazards, manage them and monitor compliance. Information on methods to measure highwall conditions and compliance with control measures on opencast strip mines, as opposed to open pit mines, was found to be anything but freely available. However, on the Ingwe underground mines, a system of rating physical conditions in each section and how well production personnel were managing the situation, has been used with success for some time. It was decided that a similar approach would be taken, and, as with the underground rating system, the resultant rating forms should not be aimed at rock engineering specialists only but should be able to be used by production personnel as well. This paper discusses the highwall risk rating method as evolved over a couple of years and highlights that it is a flexible tool that can easily be changed to suit an individual mine's requirements. It also shows how operational aspects are being measured to determine how well the identified hazards are being managed. Allied to the method is a relatively easy, and certainly "low capex," mapping technique which allows between 500 and 1000m of highwall to be covered in a day. Features generally recorded include lithology, bench height, work still to be completed, coal losses or "toes", presence of water, dolerite intrusions, existing and potential failures, prominent joints, declared special and cautionary areas, cracks on upper benches and condition of spoil piles. Highwall mapping and photography as well as basic geological data collection, enable highwall risk and operational ratings to be determined. The same rating sheets may also be completed by production personnel, but without detailed mapping.
Full Article Download:
(2227 kb)

Additional chapters/articles from the SME-ICGCM book Proceedings 21st International Conference on Ground Control in Mining

Pre-Driven Experimental Longwall Recovery Room Under Weak Ro
Longwall Mining-Induced Abutment Loads and Their Impacts on
Influence of Structural Stress Concentration and Structural
The NIOSH Shield Hydraulics Inspection and Evaluation of Leg
Study on Top-Coal Loss and the Optimum Drawing Interval of L
Stress Measurements for Safety Decisions in Longwall Coal
Re-Use of Rectangular Bolted Roadways in a Cover Depth > 100
Numerical Modeling of the Gob Loading Mechanism in Longwall
Deep Cover Pillar Extraction in the U.S. Coalfields
Evaluation of Pillar Recovery in Southern West Virginia
A Case History Investigation of Two Coal Bumps in the Southe
A Linear Coal Pillar Strength Formula for South African Coal
Anchorage Pull Testing for Fully Grouted Roof Bolts
Comparison of Some Aspects of Bolting Mechanisms Between Ful
Eclipse System Improves Resin Anchored Rebar Bolting
Design Considerations for Tensioned Bolts
Field Testing of the Fully Grouted Thrust Tensioned Bolts
Improvement in Pre-Tensioning of Strand Bolts in Australian
The Introduction of Roof Bolting to U.S. Underground Coal Mi
Support of Coal Mines in the United Kingdom
The Use of NDT Methods to Determine the Condition of Rockbol
Rockbolted Support of Retreat Longwall Gateroads at 1000m De
Roof Screening: Best Practices and Roof Bolting Machines
Numerical and Physical Modeling as Planning Tools for Rockbo
Stone Mine Design in Highly Fractured Rock
The Importance of Underground Stone Mine Roof Geology
Utilization of Ground-Penetrating Radar to Determine Roof Co
An Examination of the Loyalhanna Limestone's Structural
Highwall Stability in an Open Pit Stone Operation
Overview of Safety Considerations with Highwall Mining Opera
Highwall Monitoring to Combat Rockfall Accidents at Opencast
Seepage and Reinforcement Behavior of Grouting Into Slaking-
Floor Heave in Shallow Room-and-Pillar Mining
Analysis of a Stability Problem in an Underground Coal Mine
Comparison of Acoustic Emission and Stress Measurement Resul
Acoustic Scanner Analysis of Borehole Breakout to Define the
Estimating Rock Strengths Using Drilling Parameters During R
New developments with the coal mine roof rating
Application of geotechnical and geophysical parameters to im
Development of a Risk Rating System for Use in Underground C
Empirical and analytical design of large openings at a propo
Shear Mechanism for Mining-Induced Fractures Applied to Rock
Evaluating Techniques for Monitoring Rock Falls and Slope St
Developments in Sealant Support Systems for Ground Control
Stability Control of Clusters of Deep Openings Around Shaft
The Use of Pneumatic Stowing in Germany Considering Subsiden
A 3-D Semi-Analytical Method for Subsidence Prediction and S
Theory and Technology of Mining Subsidence Control by Grouti
Surface Subsidence Due to the Combined Effects of Undergroun