Ground Deformation In The Case Of Underground Mining Of Thick And Dip Coal Seams In The Jiu Valley Basin

Oncioiu, Gheorghe
Organization: International Conference on Ground Control in Mining
Pages: 6
Publication Date: Jan 1, 1999
The phenomena developed on the influence of thick coal seam no.3 mining, by horizontal slices and rocks caving roof control, in the Jiu Valley coal basin, are very complex. By analyzing the influence volume of underground faces and defining the stress and strain zones, around the faces, it is possible to evaluate the suitable powered support performances. Also, Jiu Valley thick coal seams involve about 50% of reserve balance in the main safety pillars of social, industrial and natural objectives, situated on the mining surface perimeters. For a correct design and drawing of main safety pillars complex research was done with the aim of establishing the subsidence parameters. Upper face rocks medium could be assimilated as a granular medium, which is in a permanent movement. For describing the rocks movement, respectively the ground surface displacement, was taken into account the stochastic mechanics principles. The theoretical solutions are in accordance within situ measurements.
Full Article Download:
(1931 kb)


Additional chapters/articles from the SME-ICGCM book Proceedings - 18th International Conference on Ground Control in Mining

Pillar Collapse at Welgedacht Colliery, South Africa: A Case
Causes of Massive Directional Roof Falls in Room and Pillar
Catastrophic Collapse Of Highwall Web Pillars And Preventati
Mine Panel Collapse - Two Case Studies
Roof Geology Mapping In Underground Coal Mines
Electromagnetic Seam Wave Mapping Of Roof Rock Conditions Ac
Geological Conditions At Continuous Miner Sections; Examples
The Role Of Engineering And Geology In Analyzing Ground Cont
The Development And Use Of Risk Assessment Techniques To Ass
Time-Dependent Analysis Of Underground Opening Stability
Tekflex As A Sprayon Screen Replacement In An Underground Ha
Tunnel Deformation Monitoring "Action Levels" In Coal Mines
Skin Failure Of Roof And Rib In Underground Coal Mines
Application Of Polyurethane Injection For Rehabilitation Of
Design Considerations For Bump-Prone Longwall Mines
Design Methodology For Standing Secondary Roof Support In Lo
Modern Shield Technology: Better Than Ever But Still Not Per
Shield Monitoring To Forecast Severe Face Weightings At The
Monitoring Of Longwall Seal Behaviour For Permeability And S
Ground Control In South African Coal Mines - A U.S. Perspect
Rock Mechanics Issues In The Trona Patch
Highwall Augering In Ultra-Thick Western Coal Reserves: Uniq
Seismic Events Due To Underground Mining Activities
Control Technology For Roof Drill Operators
Resin Annulus Size Effects On Rebar Bolt Pull Strength And R
Roof Bolt Response To Shear Stress: Laboratory Analysis
Laboratory Study Of Shear Loading And Bolt Load Transfer Mec
Analysis Of Cable Bolt Performance Using Numerical Modeling
Roof Bolting Application In Longwall Mining In Indonesia And
Ground Control Design For Multiple Seam Mining Using Finite
Pillar Design Issues For Underground Stone Mines
Calibration Of The Analysis Of Longwall Pillar Stability (AL
Mine Convergence When Using Mobile Roof Supports In Pillar R
The Advance And Relieve Mining Method: A Horizontal Stress C
Localized Horizontal Stress And Its Effect On Ground Control
Prediction And Control Of Surface Subsidence Over Abandoned
Effects Of Mining On Underground Infrastructures In The Germ
Ground Deformation In The Case Of Underground Mining Of Thic
Prevention Of Time-Dependent Subsidence By Elimination Of Gr