If you have access to OneMine as part of a member benefit, log in through your member association website for a seamless user experience.
|A finite element modelling approach is developed for the evaluation of the mechanical performance of cable bolts supports in underground mine structures. The modelling approach permits the simulation of any arbitrary number or pattern of cable bolts, that can be either partially or fully grouted, with or without end plates. The modelling technique used treats each cable bolt as a set of bar elements representing the steel cable. The bond stiffness characteristics of the grout bolt interface are represented by shear springs uniformly distributed along the cable length. Coupled with a simple linear elastic analysis, this technique can serve as a dedicated numerical model for cable bolted excavations. The application of the model is illustrated with two case studies: one for a hard rock mine and another for a coal mine.|
Additional chapters/articles from the SME-ICGCM book Proceedings - 18th International Conference on Ground Control in Mining
|Pillar Collapse at Welgedacht Colliery, South Africa: A Case||Causes of Massive Directional Roof Falls in Room and Pillar||Catastrophic Collapse Of Highwall Web Pillars And Preventati||Mine Panel Collapse - Two Case Studies||Roof Geology Mapping In Underground Coal Mines||Electromagnetic Seam Wave Mapping Of Roof Rock Conditions Ac||Geological Conditions At Continuous Miner Sections; Examples||The Role Of Engineering And Geology In Analyzing Ground Cont||The Development And Use Of Risk Assessment Techniques To Ass||Time-Dependent Analysis Of Underground Opening Stability||Tekflex As A Sprayon Screen Replacement In An Underground Ha||Tunnel Deformation Monitoring "Action Levels" In Coal Mines||Skin Failure Of Roof And Rib In Underground Coal Mines||Application Of Polyurethane Injection For Rehabilitation Of||Design Considerations For Bump-Prone Longwall Mines||Design Methodology For Standing Secondary Roof Support In Lo||Modern Shield Technology: Better Than Ever But Still Not Per||Shield Monitoring To Forecast Severe Face Weightings At The||Monitoring Of Longwall Seal Behaviour For Permeability And S||Ground Control In South African Coal Mines - A U.S. Perspect||Rock Mechanics Issues In The Trona Patch||Highwall Augering In Ultra-Thick Western Coal Reserves: Uniq||Seismic Events Due To Underground Mining Activities||Control Technology For Roof Drill Operators||Resin Annulus Size Effects On Rebar Bolt Pull Strength And R||Roof Bolt Response To Shear Stress: Laboratory Analysis||Laboratory Study Of Shear Loading And Bolt Load Transfer Mec||Analysis Of Cable Bolt Performance Using Numerical Modeling||Roof Bolting Application In Longwall Mining In Indonesia And||Ground Control Design For Multiple Seam Mining Using Finite||Pillar Design Issues For Underground Stone Mines||Calibration Of The Analysis Of Longwall Pillar Stability (AL||Mine Convergence When Using Mobile Roof Supports In Pillar R||The Advance And Relieve Mining Method: A Horizontal Stress C||Localized Horizontal Stress And Its Effect On Ground Control||Prediction And Control Of Surface Subsidence Over Abandoned||Effects Of Mining On Underground Infrastructures In The Germ||Ground Deformation In The Case Of Underground Mining Of Thic||Prevention Of Time-Dependent Subsidence By Elimination Of Gr|