Catastrophic Collapse Of Highwall Web Pillars And Preventative Design Measures

Zipf, Karl
Organization: International Conference on Ground Control in Mining
Pages: 11
Publication Date: Jan 1, 1999
In highwall mining, once a sufficient number of web pillars are developed, they can fail catastrophically in a domino-type failure, posing a safety hazard to highwall miners and sterilizing mineable reserves. Three recent case histories of catastrophic web pillar failure in U.S. and Australian mines are documented and analyzed with two design approaches. The conventional design approach uses only a strength criterion, while the postfailure design approach uses both strength and stability criteria to insure an acceptable failure mode should strength failure occur. Catastrophic highwall web pillar failures can cost money through equipment losses, production losses, coal reserve sterilization and lost opportunity costs. Coal recovery may be higher. but the benefits of higher recovery must balance the potential costs of failure. Application of the conventional or postfailure design approach will decrease coal recovery and revenues, but the risk of potentially costly failure is much less.
Full Article Download:
(2887 kb)


Additional chapters/articles from the SME-ICGCM book Proceedings - 18th International Conference on Ground Control in Mining

Pillar Collapse at Welgedacht Colliery, South Africa: A Case
Causes of Massive Directional Roof Falls in Room and Pillar
Catastrophic Collapse Of Highwall Web Pillars And Preventati
Mine Panel Collapse - Two Case Studies
Roof Geology Mapping In Underground Coal Mines
Electromagnetic Seam Wave Mapping Of Roof Rock Conditions Ac
Geological Conditions At Continuous Miner Sections; Examples
The Role Of Engineering And Geology In Analyzing Ground Cont
The Development And Use Of Risk Assessment Techniques To Ass
Time-Dependent Analysis Of Underground Opening Stability
Tekflex As A Sprayon Screen Replacement In An Underground Ha
Tunnel Deformation Monitoring "Action Levels" In Coal Mines
Skin Failure Of Roof And Rib In Underground Coal Mines
Application Of Polyurethane Injection For Rehabilitation Of
Design Considerations For Bump-Prone Longwall Mines
Design Methodology For Standing Secondary Roof Support In Lo
Modern Shield Technology: Better Than Ever But Still Not Per
Shield Monitoring To Forecast Severe Face Weightings At The
Monitoring Of Longwall Seal Behaviour For Permeability And S
Ground Control In South African Coal Mines - A U.S. Perspect
Rock Mechanics Issues In The Trona Patch
Highwall Augering In Ultra-Thick Western Coal Reserves: Uniq
Seismic Events Due To Underground Mining Activities
Control Technology For Roof Drill Operators
Resin Annulus Size Effects On Rebar Bolt Pull Strength And R
Roof Bolt Response To Shear Stress: Laboratory Analysis
Laboratory Study Of Shear Loading And Bolt Load Transfer Mec
Analysis Of Cable Bolt Performance Using Numerical Modeling
Roof Bolting Application In Longwall Mining In Indonesia And
Ground Control Design For Multiple Seam Mining Using Finite
Pillar Design Issues For Underground Stone Mines
Calibration Of The Analysis Of Longwall Pillar Stability (AL
Mine Convergence When Using Mobile Roof Supports In Pillar R
The Advance And Relieve Mining Method: A Horizontal Stress C
Localized Horizontal Stress And Its Effect On Ground Control
Prediction And Control Of Surface Subsidence Over Abandoned
Effects Of Mining On Underground Infrastructures In The Germ
Ground Deformation In The Case Of Underground Mining Of Thic
Prevention Of Time-Dependent Subsidence By Elimination Of Gr