If you have access to OneMine as part of a member benefit, log in through your member association website for a seamless user experience.
|This paper introduces an analytical approach for the determination of the vertical stress in the chain pillar system between two adjacent longwall panels. The development of this approach is based on the principles of fracture mechanics and superposition. Some empirical formulae have also been incorpomted into the development of the mathematical model. The mine entries and longwall gobs are treated as Mode I cracks in an infinite plate while the resistance of gob material and the characteristics of the pillar yield zone are considered as the distributed forces on the surface of the cracks. An user- friendly computer program has been developed to facilitate the calculation involved in this task. This approach is as accurate as the numerical analysis methods but requires much less expertise and computer hardware and software to apply|
Additional chapters/articles from the SME-ICGCM book 17th International Conference on Ground Control in Mining (ICGCM)
|Gateroad Pillar Extraction Experience at Jim Walter Resource||Stability of Backfilled Cross-panel Entries During Longwall||Mining Through In-panel Entries and Full-face Recovery Room||Cutable and Variable Yield Cement Cribbing Successfully Supp||International Experience with Longwall Mining into Pre-drive||Analysis of Geologic and Geotechnical Conditions and Their E||Comparison of Ground Conditions and Ground Control Practices||Application of Microseismic Monitoring to Longwall Geomechan||Control of Hard-to-Collapse Massive Roofs in Longwall Faces||A Study of Periodic Weighting of Longwall Supports||Effects of Panel Mining Sequence and Retreat Direction on th||Controlling Roof Beam Failures From High Horizontal Stresses||Roof Control Under Conditions of Shallow Depth and High Hori||Assessment of Roadway and Yielding-pillar Performance During||Practical Stress Modeling for Mine Planning||The Design of Room and Pillar Mining Systems in the UK||Geotechnical Planning and Development of the BHP Minerals Sa||Coal Pillar Life Prediction in the Vaal Basin, South Africa||An Analytical Approach to Determine Stress Distribution in L||In Situ Strength Testing of Rocks with the Borehole Penetrom||Performance and Safety Considerations of Hydraulic Support S||A Decade of Mobile Roof Support Application in the United St||A Critical Study of Strata Behaviour During Extraction of Pi||Progression of Longwall Gateroad Support as Conditions Chang||Application of the Coal Mine Roof Rating, Derived from Drill||The Effects of Reduced Annulus in Roof Bolting Performance||Laboratory and In Situ Results of a Slip Nut Yielding Rock B||Field Monitoring of Rock Bolting Performance in Weak Roof St||A Case Study of Bolt Performance in a Two-entry Gateroad||Automated Temporary Roof Support Systems: An Update||Safety and Productivity Innovations in Mechanized Bolting||Factors Influencing Intersection Stability in U.S. Coal Mine||Analysis of the Effect of Rate of Extraction on Strain Devel||Analysis of Panel Stability for Post-Mining Slurry Injection||Development of Timedependent Surface Subsidence Over the Tot||Transversely Elasto-Plastic Analysis of Surface Subsidence A||Landslide Occurrence and Causation in Steep Slope Areas of A||Rock Bursting and Seismicity During Ramp Development, Lucky||Advances in Remote Sensing Techniques for Monitoring Rock Fa|