Strategies for the Application of Rockbolting Technology to Longwall Gateroads in Chinese Coal Mines

Xiu, Zuoliang
Organization: International Conference on Ground Control in Mining
Pages: 8
Publication Date: Jan 1, 1997
Experience indicates that rockbolting is the most efficient and cost effective means of supporting gateroads of retreating longwalls. However, gateroads supported solely by rockboltiug currently accounts for less than 16% of the 4500km of annual gatemad drivage in China According to a stated target of the Ministry of Coal Industry, this percentage should be at least 50% by the year 2000. Since the learning stage of the technology which is indicated by low drivage rates and frequent roof falls in rockbolted gateroads must be overcome , strategies for the application of rockbolting to gateroads have become the focus of discussions on this topic. This pap presents the recent development on longwall gateroad rockbolting technology in China The development work has concentrated on understanding the mechanism of rockbolting; establishing new design procedures of bolting parameters fix gateroad support upgrading the consumable; optimizing bolt installation procedures; adopting better roofbolting machines; and developing adequate secondary reinforcement technique. The authors believe that this development work together with the on-going wok in other aspects of gaterosd rockbolting, as discussed in this paper 9 represent the rational strategies for the application of rockbolting technology to a wider range of longwall gateroads in Chinese d mines .
Full Article Download:
(2369 kb)


Additional chapters/articles from the SME-ICGCM book 16th International Conference on Ground Control in Mining (ICGCM)

Longwall Mining-Through the Backfilled In-Panel Entries at C
Performance of Various Standing and Cribless Tailgate Suppor
Measurement of Effects of Interaction and Influence on Mine
Effects of Longwall Mining on Streamflow in the Pittsburgh S
Longwall Surface Subsidence Prediction Through Numerical Mod
Long-term Subsidence Over Longwall Chain Pillar Systems and
Subsidence Prediction Influence Assessment and Damage Contro
Formation of Face Headings Using Stress Relief at Asfordby M
Significant Weighting Events on the Longwalls in the Phalen
Full-face Pressure Monitoring in Medium-Weak Roof Condition
Research on the Interaction Between Roof Strata and Shield S
Roof Instability of Longwall Face at Ikeshima Colliery
Gob Canopy Roof Support for Difficult Natural Conditions
Yielding Cement Roof Supports for Longwall Mining
Management of the Dynamic Phenomena of Rock Pressure in Unde
Continuing Development of Innovative Cable Support Systems
Extending the Limits of Strata Bolting by the Use of Flexibl
Implementation and Evaluation of Roof Bolting in MICARE Mine
New Methods and Technologies of Roofbolting in Australia Coa
New Design Criteria for Roof Bolt Systems
Control Mechanism of a Tensioned Bolt System in the Laminate
A Study of the Performance of Glass Fibre Rock Reinforcement
A Method for the Selection of Rock Support Based on Bolt Loa
Strategies for the Application of Rockbolting Technology to
A Troubleshooting Guide for Roof Support Systems
A Statistical Overview of Retreat Mining of Coal Pillars in
Full-Scale Performance Evaluation of Mobile Roof Supports
Effect of the Interchamber Pi Yield on the Surface Strains i
Salt Pillar Design Equation
Case Study of Conditions Observed During the Removal of a Hi
Case Study of the Effect of Stratigraphic Location on Roof S
Ground Control and the Inundation of the Retsof Mine
Weatherability Test of Rocks for Underground Mines
Shear Strength Characteristics of Soft Rock Joints Based on
Comparison of Pillar Strengths Calculated Using Empirical Eq
Effects of In-seam and Near-seam Conditions and Asymmetric P
Ground Control Worker Safety During Extended Cut Mining
Analysis of Extensometer Data from a Room Widening Experimen
Airbag Support for Ground Control in Thin Seam Coal Mining
Development of a Statistical-Analytical Approach for Assessi
Ground Control Criteria for Coal Reserve Optimization in Mul
Calcium Aluminate Kiders in Hard Rock and Coal Mining
Simplified Pre-and Post-Processing Technique for Performing