If you have access to OneMine as part of a member benefit, log in through your member association website for a seamless user experience.
|Full-face shield leg pressures in a longwall panel for a three-month period were collected and analyzed. The pressure data were presented in the following forms: full- panel full-face shield pressure, individual shield pressure, full-face shield pressure, full-panel time-weighted-average pressure, and relationships among setting pressure, final pressure and pressure increment. Although shield pressure varies from shield to shield and from cycle to cycle, the setting pressure and face advance rate do control the 6nal pressure and time-weighted average pressure.|
Additional chapters/articles from the SME-ICGCM book 16th International Conference on Ground Control in Mining (ICGCM)
|Longwall Mining-Through the Backfilled In-Panel Entries at C||Performance of Various Standing and Cribless Tailgate Suppor||Measurement of Effects of Interaction and Influence on Mine||Effects of Longwall Mining on Streamflow in the Pittsburgh S||Longwall Surface Subsidence Prediction Through Numerical Mod||Long-term Subsidence Over Longwall Chain Pillar Systems and||Subsidence Prediction Influence Assessment and Damage Contro||Formation of Face Headings Using Stress Relief at Asfordby M||Significant Weighting Events on the Longwalls in the Phalen||Full-face Pressure Monitoring in Medium-Weak Roof Condition||Research on the Interaction Between Roof Strata and Shield S||Roof Instability of Longwall Face at Ikeshima Colliery||Gob Canopy Roof Support for Difficult Natural Conditions||Yielding Cement Roof Supports for Longwall Mining||Management of the Dynamic Phenomena of Rock Pressure in Unde||Continuing Development of Innovative Cable Support Systems||Extending the Limits of Strata Bolting by the Use of Flexibl||Implementation and Evaluation of Roof Bolting in MICARE Mine||New Methods and Technologies of Roofbolting in Australia Coa||New Design Criteria for Roof Bolt Systems||Control Mechanism of a Tensioned Bolt System in the Laminate||A Study of the Performance of Glass Fibre Rock Reinforcement||A Method for the Selection of Rock Support Based on Bolt Loa||Strategies for the Application of Rockbolting Technology to||A Troubleshooting Guide for Roof Support Systems||A Statistical Overview of Retreat Mining of Coal Pillars in||Full-Scale Performance Evaluation of Mobile Roof Supports||Effect of the Interchamber Pi Yield on the Surface Strains i||Salt Pillar Design Equation||Case Study of Conditions Observed During the Removal of a Hi||Case Study of the Effect of Stratigraphic Location on Roof S||Ground Control and the Inundation of the Retsof Mine||Weatherability Test of Rocks for Underground Mines||Shear Strength Characteristics of Soft Rock Joints Based on||Comparison of Pillar Strengths Calculated Using Empirical Eq||Effects of In-seam and Near-seam Conditions and Asymmetric P||Ground Control Worker Safety During Extended Cut Mining||Analysis of Extensometer Data from a Room Widening Experimen||Airbag Support for Ground Control in Thin Seam Coal Mining||Development of a Statistical-Analytical Approach for Assessi||Ground Control Criteria for Coal Reserve Optimization in Mul||Calcium Aluminate Kiders in Hard Rock and Coal Mining||Simplified Pre-and Post-Processing Technique for Performing|