If you have access to OneMine as part of a member benefit, log in through your member association website for a seamless user experience.
|Case study data were analyzed to develop and quantify empirical stress transfer relationships between seams for both longwall and room and pillar mines. Layering in the innerburden and the distance between seams were determined to be the controlling factors. To evaluate the effect of bedding planes on stress transfer, laboratory studies were conducted using layered, low modulus gravity loaded photoelastic models. Parameters investigated were thickness, number of discrete layers, modulus and friction between layers. Results showed that there was significant distortion of the pressure bulb in highly laminated conditions which correlated with the results of empirical analysis. Relationships developed were used to modify the results obtained from numerical modelling between multi-seam longwall operations. Research conclusions were demonstrated using case studies.|
Additional chapters/articles from the SME-ICGCM book Proceedings of 14th International Conference on Ground Control in fining
|Truss Systems For Longwall Tailgate Support - Update||Cable Support Systems For Longwall Gate Road Stability||Innovative Tailgate Support For Heavy Ground: 11 Left Longwa||Parameters Affecting Resin-Anchored Cable Bolt Performance:||Roof Support Performance In High Stress Conditions||Regional Horizontal Stress And Its Effect On Longwall Mining||Deformation Development Around Mine Roadways And Simulation||Monitoring Mobile Roof Supports||Analysis Of Retreat Mining Pillar Stability||Planning And Design For Barrier Pillar Recovery Three Case H||Influence Of Partings In A Coal Seam On Long Term Pillar Sta||A Cooperative Study Of Gate Entry Designs Welbeck Colliery (||Comparative Case Study Of Yielding And Critical Coal Pillar||Comparison Of Empirical, Analytical, And Numerical Methods O||Nonlinear Approach For Determining Design Criteria For Yield||In-Situ Coal Strength Determination - Case Studies||The Design And Application Of Propsetter? In Underground Coa||Renewed Interest In Prop Supports As A Replacement For Wood||Improved Intersection Design And Monitoring In The Sydney Co||Drivage System In Retreat Longwall Gateroad||Case Study Of Stability Investigations Related To Shallow Un||Analysis Of Rockbolt Performance At The Waste Isolation Pilo||Continuous Improvement In Cuttable Coal Rib Support In Austr||Floor Failure Induced By Lateral Stress Ahead Of Longwall Su||Towards A Method Of Determining Floor Quality In An Undergro||Chinese And North American High-Extraction Underground Coal||Integration Of CAD-Based Mine Planning And Subsidence Engine||Development Of A Subsidence Database And Determination Of Su||Statistical Regional Calibration Of Subsidence Prediction Mo||Subsidence Monitoring Results, Thick Seam Longwall Mining In||Application Of Mechanical And Groundwater-Flow Models To Pre||The Application Of Underground In-Seam Seismic Methods (UISS||Vertical Stress Redistribution Around A Retreating Longwall||Entry Stability Monitoring & Analysis For Longwall & Continu||A Case Study Of A Deformation Mechanism Around A Two-Entry G||Multiseam Mining On South African Collieries||Design And Planning Of Lower Seam Longwall Gateroads||Optimizing Pillar Design In A Multi-Seam Environment|