Statistical Regional Calibration Of Subsidence Prediction Models

Cleaver, D. N.
Organization: International Conference on Ground Control in Mining
Pages: 8
Publication Date: Jan 1, 1995
Like other influence function methods, the SWIFT subsidence prediction program, developed within the Mineral Resources Engineering Department at the University of Nottingham, requires calibration to regional data in order to produce accurate predictions of ground movements. Previously, this software had been solely calibrated to give results consistent with the Subsidence Engineer's Handbook (NCB, 1975). This approach was satisfactory for the majority of cases based in the United Kingdom, upon which the calibration was based. However, in certain circumstances within the UK and, almost always, in overseas case studies, the predictions did not correspond to observed patterns of ground movement. Therefore, in order that SWIFT, and other subsidence prediction packages, can be considered more universal, an improved and adaptable method of regional calibration must be incorporated. This paper describes the analysis of a large database of case histories from the UK industry and international publications. Observed maximum subsidence, mining geometry and Geological Index for several hundred cases have been statistically analysed in terms of developing prediction models. The models developed can more accurately predict maximum subsidence than previously used systems but also, are capable of indicating the likely range of prediction error to a certain degree of probability. Finally, the paper illustrates how this statistical approach can be incorporated as a calibration system for the influence function program, SWIFT.
Full Article Download:
(1972 kb)


Additional chapters/articles from the SME-ICGCM book Proceedings of 14th International Conference on Ground Control in fining

Truss Systems For Longwall Tailgate Support - Update
Cable Support Systems For Longwall Gate Road Stability
Innovative Tailgate Support For Heavy Ground: 11 Left Longwa
Parameters Affecting Resin-Anchored Cable Bolt Performance:
Roof Support Performance In High Stress Conditions
Regional Horizontal Stress And Its Effect On Longwall Mining
Deformation Development Around Mine Roadways And Simulation
Monitoring Mobile Roof Supports
Analysis Of Retreat Mining Pillar Stability
Planning And Design For Barrier Pillar Recovery Three Case H
Influence Of Partings In A Coal Seam On Long Term Pillar Sta
A Cooperative Study Of Gate Entry Designs Welbeck Colliery (
Comparative Case Study Of Yielding And Critical Coal Pillar
Comparison Of Empirical, Analytical, And Numerical Methods O
Nonlinear Approach For Determining Design Criteria For Yield
In-Situ Coal Strength Determination - Case Studies
The Design And Application Of Propsetter? In Underground Coa
Renewed Interest In Prop Supports As A Replacement For Wood
Improved Intersection Design And Monitoring In The Sydney Co
Drivage System In Retreat Longwall Gateroad
Case Study Of Stability Investigations Related To Shallow Un
Analysis Of Rockbolt Performance At The Waste Isolation Pilo
Continuous Improvement In Cuttable Coal Rib Support In Austr
Floor Failure Induced By Lateral Stress Ahead Of Longwall Su
Towards A Method Of Determining Floor Quality In An Undergro
Chinese And North American High-Extraction Underground Coal
Integration Of CAD-Based Mine Planning And Subsidence Engine
Development Of A Subsidence Database And Determination Of Su
Statistical Regional Calibration Of Subsidence Prediction Mo
Subsidence Monitoring Results, Thick Seam Longwall Mining In
Application Of Mechanical And Groundwater-Flow Models To Pre
The Application Of Underground In-Seam Seismic Methods (UISS
Vertical Stress Redistribution Around A Retreating Longwall
Entry Stability Monitoring & Analysis For Longwall & Continu
A Case Study Of A Deformation Mechanism Around A Two-Entry G
Multiseam Mining On South African Collieries
Design And Planning Of Lower Seam Longwall Gateroads
Optimizing Pillar Design In A Multi-Seam Environment