Effect Of High-Extraction Coal Mining On Surface And Ground Waters

Kendorski, Francis S.
Organization: International Conference on Ground Control in Mining
Pages: 14
Publication Date: Jan 1, 1993
High-extraction mining of coal and other stratified minerals has a predictable effect on the surface and subsurface. Impacts on ground waters in overlying strata and on surface waters, that are associated with overlying sequential zones of collapse, fracturing, aquiclude, constrained strata, and surface disturbances can be anticipated. Since first quantified around 1979 in Bureau of Mines sponsored contract research work and others (and often adopted by state regulators), with zone extents based upon multiples of mined seam height of 24 to over 60 for the fractured zone, much new data have become available. In examining the sources of data and the methods and intents of the researchers of over 65 case histories, it became apparent that the strata behaviors were being confused with overlapping vertical extents reported for the fractured zones and aquiclude zones depending on whether the researcher was interested in water intrusion into the mine or in water loss from surface or ground waters. These more recent data, and critical examination of existing data, have led to the realization that the former "Aquiclude Zone" defined for its ability to prevent or minimize the intrusion of ground or surface waters into mines has another important character in increasing storage of surface and shallow ground waters in response to mining with no permanent loss of waters. This zone is here named the "Dilated Zone." The existence of the dilated zone explains the ratios of up to 60 times the mined thickness. Surface and ground waters can drain into this zone, but seldom into the mine, and can eventually be recovered through closing of dilations by mine subsidence progression away from the area, or filling of the additional void space created, or both. A revised model has been developed which accommodates the available data, by modifying the zones as follows: ? collapse and disaggregation extending 6 to 10 times the mined thickness above the panel ? continuous fracturing extending approximately 24 times the mined thickness above the panel, allowing temporary drainage of intersected surface and ground waters ? development of a zone of dilated, increased storativity, and leaky strata with little enhanced vertical permeability from 24 to 60 times the mined thickness above the panel above the continuous fracturing zone, and below the constrained or surface effects zones, whose thickness or existence is dictated by the zones above and below ? maintenance of a constrained but leaky zone above the dilated zone and below the surface effects zone, whose thickness or existence is dictated by the zones above and below ? limited surface fracturing in areas of extension extending up to 50 ft or so beneath the ground surface
Full Article Download:
(4669 kb)

Additional chapters/articles from the SME-ICGCM book Proceedings of 12th International Conference on Ground Control in Mining

Bolting Practice In Longwall Gateroads At The Miike Colliery
Cable Supports For Improved Longwall Gateroad Stability
Comparisons Of Active Versus Passive Bolts In A Bedded Mine
Flexibolt Flexible Roof Bolts: A New Concept For Strata Cont
The Design And Application Of Hercules Cribs For Underground
Cyprus Shoshone Tailgate Roof Control: Case Study
Engineering Methods For The Design And Employment Of Wood Cr
The Use Of Foamed Cement Cribs At American Electric Power Fu
A Comparison Of Support Reactions To Retreat Longwall Front
Entry Design For Optimum Stability In A Multi-Seam Environme
Gate Entry Design For Longwalls Using The Coal Mine Roof Rat
A Test Of Predictive Numerical Models To Simulate Entry Desi
The Coal Mine Roof Rating (CMRR) A Practical Rock Mass Class
Comparative Analysis Of Longwall Gateroad Designs In Four De
Further Improvements In The Roof Beam Tilt Method Of Gateroa
Application Of A Static And Geophysical Monitoring System Fo
Flexible Support Design For Gateroads Of Retreating Longwall
Longwall Support Monitoring
Case Studies Using Mine-Wide Monitoring Systems For Geotechn
An Application Of Tree Classification Method In Analysis Of
Image Analysis Development And Application To Fracture Patte
Mathematical Modeling Of Strong Roof Beds In Longwall Mining
Load Deformation Behavior Of Simulated Longwall Gob Material
Monitoring Of The Interaction Effects Over A Longwall Panel
Design, Monitoring And Evaluation Of A Pre-Driven Longwall R
Ground Control And Safety Considerations During Longwall Rec
Utilization Of Polymer Grid Structures In Shield Recovery Op
The Impact Of Variability In Coal Strength On Mine Planning
Underground Application Of Optimization
Modern Geotechnical Exploration And Mine Design
A New Method For Longwall Pillar Design
A Rock Mass Strength Concept For Coal Seams
Techniques To Increase Yield Pillar Residual Strength
Application Of Seismic Tomography For Assessing Yield Pillar
Structure, Strength And Relaxation Of Interbuden For Input I
Rock Compaction Caused By Dewatering In Poorly- Consolidated
Correlation Between The Effect Of Confining Pressure On Comp
Characterization Of Structural Integrity And Stress State Vi
Rock Mechanics Property Data Bank For Coal Measure Strata
Failure Modes Of Mine Tunnels In Stratified Rock Structures
Determination Of Plate Size Effect On Ultimate Bearing Capac
Development And Evaluation Of A Floor-Bearing Capacity Test
Investigation Of Blast Damage And Underground Stability
Development Of A Slope Stability Program For Improved Quarry
Material Instability Hazards In Mine Processing Operations
Mine Design Considerations For Surface Subsidence Control
Surface Fracture Development From Mine Subsidence In Eastern
An Integrated Approach To Subsidence Modelling And Predictio
Effect Of High-Extraction Coal Mining On Surface And Ground
Economic Evaluation Of Subsidence Damage Mitigation Techniqu