Design Of Yield Pillars In The Southern Coal Field Of New South Wales

Chaturvedula, V. K.
Organization: International Conference on Ground Control in Mining
Pages: 6
Publication Date: Jan 1, 1992
With increasing demand for more efficient production from the underground coal mines in the Southern Coalfields of New South Wales, their design and operational aspects are constantly being reviewed and improved. One key area in such pursuits is the reliable design of stable and yielding pillars. The current designs of pillars based mostly on experience leads to unnecessary sterilisation of coal or strata control problems. To explore such mine design problems, computer based modelling is increasingly being applied. In the study described in this paper, the object was to determine the particular width of pillars separating three roadways in a panel at which the pillars yielded completely and their loads largely transferred to the unmined coal at the flanks of the panel, This was approached through a computer simulation of the behaviour of the strata around a panel, in which the three roadways were separated by pillars of progressively decreasing width. A computer program called FLAC based on the finite difference method was used to simulate the relevant strata behaviour in vertical sections. The appropriate in situ values of the deformability parameters relating to the coal seam, roof and floor were determined from the back analysis of some displacement measurements in such a panel. The process involved successive modelling of a vertical section through such a panel, starting with realistic values of the parameters and varying them until the measured and the modelled displacements agreed closely. Based on the results of the numerical modelling, the width of a yielding pillar for the given conditions is suggested.
Full Article Download:
(1684 kb)


Additional chapters/articles from the SME-ICGCM book 11th International Conference on Ground Control in Mining Proceedings (ICGCM) 11th

Assessment Of Applicability Of Strength Criteria For Rock An
A Method For Establishing Site Specific Coal Pillar Design G
Strata Mechanics Of Pillar Extraction Goaf Edges
Rock Mass Classification As An Aid To Estimating The Strengt
A Study On Stress Distribution And Reasonable Size Of Coal P
Evaluating Coal Pillar Mechanics Through Field Measurements
Critical Appraisal Of Pillar Design As Required By Coal Mine
Sidewall Fracturing In Coal Room And Pillar And Pillar Extra
Design Of Yield Pillars In The Southern Coal Field Of New So
Pillar Design In Bump-Prone Deep Western U.S. Coal Mines
Elasto-Plastic Finite Element Structural Stability Analysis
Scale Model Studies To Investigate The Effects Of Various St
Historical Perspective And Future Projection Of Longwall Min
Analysis Of Longwell Shields And Their Interaction With Surr
In-Situ Performance Analysis Of Immediate Forward Support (I
Australian Longwall Geomechanics - A Recent Study
Strata Support Interaction On A Powered Support Longwall Fac
Geotechnical Constraints On A 6 M Single Pass Longwall
Prediction Of Longwall Support Loading At Southern Colliery,
Pressure Distribution Of 2-Leg Shield Supports
A Simple Finite Element Model For Predicting The Behaviour O
Surface And Borehole Microseismic Monitoring Of Longwall Fac
Rigid Or Yielding Roof Bolts: At The Face Or Away From The F
An Assessment Of Rockbolting In Geologically Disturbed Mine
Load Transfer Mechanisms In Reinforcing Tendons
Innovative Rock Reinforcement Hardware
Innovative Ground Support System
A New Rock Bolting Concept For Underground Roadways
Design Considerations For Cable Truss Secondary Supports In
Influence Of Bolts On Discontinuities And Yielding Rock - Co
Monitoring Indices For The Support And Surrounding Strata Sy
Deformation Of Retreat Gatroad In Interpanel-Pillar System
Optimisation Of Reinforcement Design Of Coal Mine Roadways
How To Cope With Cutter Roof Problem
Horizontal Stress Control In Underground Coal Mines
A Study Of Floor Heave In The Mines Of The Southern Coalfiel
Ground Control Hazard Analysis In Multi-Seem Mining
Convergence And Load Measurements In An Underground Mine In
Detailed Underground Measurements Of Roof Deflection And Bed
Subsurface Fracture Development Due To Longwall Mining And I
Characterization Of Overburden Response To Longwall Mining I
Continuous Monitoring Of Mechanised Breaker Line Supports To
Numerical Modelling Of A Monitored Site In An Underground Co
Reformation Of The Hydraulic Stowing Mining Method
A Study On The High-Water Solidifying Materials For Gob-Alon
Geological Sensing - The Key To Increasing Miner Safety
Cemented Backfill In Two Italian Massive Orebodies
A Possible Alternative To Hardwood Chock Pieces
Ground Control Techniques Utilizing Polymer Grid Structures
Application Of DDM To Some Rock Pressure Problems In Japanes
Evaluation Of The Strength Behaviour Of Monolithic Packs
Probabilistic Stability Analysis Of Embankments And Slopes
Application Of Tailing Sand And Water As Backfill Material I
Subsidence Prediction From The Beginning - Collie Coal Basin
Mining Subsidence Of An Urban Area In Ipswich, Queensland
Investigation Of Subsidence Event Over Multiple Seam Mining
Classification Of Mine-Related Subsidence East Of Mississipp
Influence Of The Sloping Of Ground Surfaces On Mine Subsiden
Effects Of Subsidence On Steep Topography And Cliff Lines
The Effectiveness Of Interpanel Pillars In The Control Of Su
Cross Well Acoustic Tomography To Locate Abandoned Undergrou
Three Dimensional Numerical Modelling Of Effects Of Subsiden
A Comprehensive Computer Model For Predicting Dynamic Subsid
Development Of Void Diffusion Models To Predict Subsidence D
Application Of A Simplified Three-Dimensional Roof-Pillar-Fl
A Design Approach For A Swelling Rock In An Underground Mine
Study Of The Impact Of Mining Under Massive Roof At Datong C
Weak Claystone Floors And Their Implications To Pillar Desig
A Method For Determination Of Strength Of Coal Mass
A Study On Application Of Comprehensive Rock Mechanical Prop
The Mechanical Property Of Coal Containing Gas
The Rheological Fracture Properties And Outburst Mechanism O
Investigation And Analyses Of Sudden Outbursts Of Gas During
A Casting Method For Artificial Rock Specimens
Progress In The Knowledge Of Granite Cutting With Diamond Wi
A Simple Method Of Measuring Rock Fracture Toughness Using T
Mine Stability Evaluation From Microseismic Activity
The Response Of Massive Structures Inferred From Tidal Tilt
Optimization Of Bench Blast Design With The Aid Of Computer
The Directional Drill Monitor For Long Hole Gas Drainage In
Effect Of Drilling Fluid Composition On Penetration Rate
Prediction Of Rock Cutting Performance Using Fracture Mechan
Investigation Into Cutting Characteristics Of Indian Coal Se
Prediction Of Shearer Cutting Performance
Sub-Surface Cracks Due To Disc Cutter Spacing For Improved R