Comparative Studies In The Mechanics Of Grouted Roof Bolts

Signer, Stephen P.
Organization: International Conference on Ground Control in Mining
Pages: 7
Publication Date: Jan 1, 1988
Email to a Friend Abstract
To improve the understanding of the support interaction mechanics between grouted bolts and coal mine roofs and to help lay the foundations for improved design and evaluation techniques, the 0.8. Bureau of Mines has conducted laboratory, field, and analytical studies of the load transfer mechanics of grouted roof bolts. Mechanisms by which load is transferred from a bolt through the grout to the rock mass are analyzed. Strain gauges were installed on over 70 bolts and tested to observe the rate of load transfer when a force was applied at the bolt head. Laboratory and field tests were conducted to determine bolt-grout- rock interaction behavior in both the elastic and postyield phases. Long-term laboratory tests were run to determine the time-dependent properties of both polyester resin- and-gypsum-grouted bolts. Numerical studies using finite- element techniques were compared to the experimental results. Elastic tests showed that 90 pct of the applied load was transferred within 24 in of bolt length. Long-term tests indicated that creep is more significant in gypsum-grouted bolts than in resin- grouted bolts. Plastic studies showed that yielding of steel will translate down the length of the bolt from 6 to 20 in.
Full Article Download:
(2027 kb)


Additional chapters/articles from the SME-ICGCM book Proceedings 7th International Conference on Ground Control in Mining (ICGCM) 7th

Field Evaluation of Yield Pillar System at a Kentucky longwa
In-Situ Pillar Strength Determination for Two-Entry Longwall
Integrity Factor Approach to Assess the Stability of Room-an
Longwall Recovery Utilizing The Open Entry Method And Variou
Design Of Lower Seam Longwall Operations In Multiple Seam Mi
Method Of Selecting Suitable Types Of Powered Supports At Lo
An Overview Of The National Roof Evaluation Accident Prevent
Strata Control Advances At Jim Walter Resources, Mining Divi
Portal Stability In Rock
Bailey Mine Slurry Impoundment Longwall Subsidence Monitorin
Prediction Of Surface Subsidence And Strain In The Appalachi
Computerised Subsidence And Displacement Prediction Using In
Computer Modeling Of Yield Pillar Behavior Using Post-Failur
Practical Rock Mechanics For Safety And Productivity Improve
Geotechnical Mine Design Of The Foidel Creek Mine
A Hydrogeomechanical Study Of Overburden Aquifer Response To
Comparison Of Predictions And Measurements Of Subsidence Cau
RYBAD Empirical Field Model For Prediction Of Maximum Land S
Mining Under Strong Roof
Sub-Surface Ground Movements Associated With Longwall Mining
A Computer Simulation Of Breakage Of The Main Roof In Longwa
Evaluation Of Low-Coal ATRS Systems
Analysis Of Major Failure Through Integration Of Static And
Outbursts And Rockbursts In Coal Mines
Analysis Of The Initial Collapse Of The Overburden Over Long
The Influence Of Stream Valleys On Coal Mine Ground Control
Aerostatic Support System For Underground Coal Mines
A Simplified Two-Dimensional Analysis Of The Roof-Pillar-Flo
Comparative Studies In The Mechanics Of Grouted Roof Bolts
Seismic Studies Over Active Longwall Mines
Surface Ground Movements Over Longwall Mining In The Pittsbu
Effect Of Longwall Mining Subsidence On The Stability Of Sur
Study Of Quantitative Impacts To Ground Water Associated Wit
The Broken Rock Zone Around Tunnels And Its Support Theory
Subsidence In Indian Coalfields
Case Studies Of Depillaring Under Special Strata And Mining
The Control Of Surface Subsidence By Width/Depth Ratio And C
Design Of The Ventilation Shaft In The South Link Railway Tu