If you have access to OneMine as part of a member benefit, log in through your member association website for a seamless user experience.
|Rockburst conditions were first encountered at Inco's Sudbury area operations in the mid 1930's when mining advanced to below the 610 m (2000 ft.) horizon. Now, mining is being carried out at depths down to 2130 m (7000 ft.) at Inco'a Creighton Mine. While rockburst potentials have increased with depth. improvements in mine planning, methods, support systems and developments in destressing have alleviated the condition to where it is less of a problem now than it was in the early years. Hang of the improvements were developed, of necessity. through observation and reasoning because these were the only tools available at the time. Now, we are making use of stress - measurements, numerical modelling and microseismic source location technology to - help further reduce rockburat hazards.|
Additional chapters/articles from the SME-ICGCM book Proceedings 6th International Conference on Ground Control in Mining (ICGCM) 6th
|Microseismic Monitoring of Mountain Bumps and Bounces: A Cas||Factors Influencing the Occurrence of Coal Pillar Bumps at||Longwall Pace Bursts and Inadequate Caving: A Came Study||Mine Layout Deign for Coal Bump Control||The Strong Outbursts of Coal and Gas in Coal Mines in China||Bock Bursts Occurrence. in the Coeur D'Alene Mining Dis||A History of Bock Burst Research in the Coeur D'Alene M||Chemical Destressing to Alleviate Rockbursts||Rockburst Control Measures at INCO's Creighton Mine||Prevention. Control and Management of Coal and Gas Outbursts||Application in Design for Close Proximity Multi-Seem Mining||Geologic Conditions Affecting Mineability in the Jane Mine.||Analysis of Cutter Roof Using the Boundary Element Method||A Novel Ground Control Program at Plateau Mining Company||Evaluation of Anchorage Integrity for Grouted Bolts in Weak||STRATA III ? A Full-Spectrum Roof Control Concept||Study of Ground Movement Over a Longwall Mine||Field Measurements of Overburden and Chain Pillar Response t||A Method for Sizing Longwall Pillars Based on Field Measurem||Aspects of Chain Pillar Design in Relation to Longwall Minin||The Initial Collapse of the Overburden Over Longwall Panels||Monitoring and Prediction of Ground Movements Above Undergro||Mechanisms of Chimney Subsidence Over Abandoned Coal Mines||Time-dependent Behavior of Immediate Weak Floor Strata from||The Significance of Specimen Stiffness and Post Yield Charac||Frictional Properties of Rock Applied to Mining Excavations||Ice Pillars, Packwalls, and Brattices||Investigation of Subsidence Over AML: A Case Study||Deign of Support System for Mining Tunnels in Carboniferous||Support of Tunnels in South African Gold Mines||The Stress Measurement and Underground Engineering||Field Measurements Of Overburden And Chain Pillar Response T|