If you have access to OneMine as part of a member benefit, log in through your member association website for a seamless user experience.
|Current longwall pillar design methods are based on many assumptions about pillar and entry response to longwall abutment loads. Knowledge of the magnitude and time-of-arrival of abutment loads is essential for Improving design procedures. The abutment loads are in turn related to the development of yield zones and horizontal confining stresses in pillars. Entry stability, which is the goal of any longwall pillar design, is affected by in situ stresses as well as the interaction between the roof, pillars, and floor. The paper describes a study performed in a longwall panel at a West Virginia coal mine. The behavior of two headgate pillars and the adjacent entries was- monitored as the longwall face approached and moved past. The results provided a detailed picture of the response of long- wall pillars and entries to abutment loadings.|
Additional chapters/articles from the SME-ICGCM book Proceeding of the Fifth Conference on Ground Control in Mining (ICGCM)
|Expanded Cement: New Solutions for Age-Old Problems||Determination of Effective Column Lengths for Resin-Grouted||How to Design an Efficient Roof Bolting Plan Based on Simple||Donut Cribbing--A Hew Heavy-Duty Roof Support Concept||Development of A Yielding Steel Post||Design Procedure for Arch Canopies for Rehabilitation of Hig||Investigation of Some Alternatives to Timber Posts and Cribs||Design and Field Testing of a Mobile Roof Support for Retrea||Change in Primary Roof Support System at Quarto Mining Compa||Remote Mining Using Water for Ground Support||New Type of Load Cell for Monitoring of Roof Bolt Tension||Field Measurements of Chain Pillar Response to Longwall Abut||Integrated Instrumentation Method of Stress State, Material||A Study of Roof Caving in the Eastern U.S. Coalfields||A Simple Tool to Measure Stress in Mine Backfill||Optimization of the Stress Control Method to Improve Product||Effect of High Horizontal Stress on Coal Mine Entry Intersec||Analysis of Small-Scale Thrust Faults and Their Effect on Co||A Case History of Computer-Aided Lineament Analysis for Grou||Designing for Upper Seam Stability in Multiple Seam Mining||Behavioral Aspects of Roof/Rib Injuries--Implications for Tr||Engineering Classification of Shales||Empirical Approach to Calculate Rock Loads in Coal Mine Road||Assessment of the Rockburst Proneness in Hard Rock Coal Mine||Outburst Control in Underground Coal Mines,||The Effect of Immediate Strata on Pillar Behavior in Retreat||Roof Control Problems on Development and Longwall Gateroads||A Case Study of Longwall Roof-Supports Interaction||Tailgate Support Evaluation at Plateau Mining Company||Methods of Controlling Hard Roof in a Longwall Face|