Geotechnical Aspects of Subsidence over Room and Pillar Mines in Illinois

Marino, Gennaro G.
Organization: International Conference on Ground Control in Mining
Pages: 9
Publication Date: Jan 1, 1984
Site conditions at several shallow room and pillar mines in Illinois are described and compared with the characĀ¬teristics of the subsidence profiles at the ground surface. The shape and magnitude of the subsidence profiles were found to be closely related to the thickness of the soil and rock over-burden the percent extraction of the coal, and the shape of mine pillars. The room and pillar mines were located at a shallow depth (from 112 to 220 ft), beneath flat to gently rolling terrain. Thickness of the coal seams ranged from 5 to 9 ft and at all sites was underlain by underclays. This information has been developed in order to improve techniques for evaluating the subsidence potential at sites within the Illinois coal basin. he results presented form a small portion of the work carried out by the University of Illinois with Illinois Abandoned Mined Lands Councils and the U. S. Bureau of Mines at the Minneapolis Research Center in Minnesota (Marino and Mahar, 1985). Presented in the paper are the modes of mine failures observed for Illinois room and pillar mines, an overall summary of the site geologic and mining condiĀ¬tions, case histories of each mode of failure, a comparison of sag profiles, and then an empirical relationship between the site conditions and the maximum sag subsidence. The most ideal case histories are presented to illustrate fundamental behavior. A brief of the Paper is given in a summary and conclusions section.
Full Article Download:
(2241 kb)


Additional chapters/articles from the SME-ICGCM book Proceeding of the Fourth Conference on Ground Control in Mining (ICGCM)

Truss Bolting On-Cycle in Jane Mine Lower Freeport Seam
Design Of A Roof Truss Bolting Plan For Bear Mine
Tension-Torque Relationship For Mechanical Anchored Roof Bol
A Novel System For Automatic Installation Of Cement Grouted
Load Transfer Mechanics In Fully-Grouted Roof Bolts
An Investigation Of Longwall Pillar Stress History
Impact Of Horizontal Load On Shield Supports
Interaction Between Roof And Support On Longwall Faces With
Roof Control With Polyurethane For Recovery Of Kitt Energy?s
First Caving And Its Effects--A Case Study
Staubbekampfung An Schildausbau In Bruchbaustreben (Combatin
Yield Pillar Applications--Impact On Strata Control And Coal
Constraint Is The Prime Variable In Pillar Strength
Massive Pillar Failure--Two Case Studies
Investigations Of Underground Coal Mine Bursts
Destressing Practice In Rockburst-Prone Ground
Statistical Characterization Of Coal-Mine Roof Failure: Sugg
Pillar Design - Continuous Miner Butt Section And Longwall D
Design Factors In Near-Seam Interaction
Remote Sensing For Roof Control And Mine Planning: An Overvi
Design, Construction And Performance Of A Single Pass Lining
Computer Modelling And In Situ Instrumentation Techniques: A
A Sonic Wave Attenuation Technique For Monitoring Of Stress
The Radio Imaging Method (RIM) -- A Means Of Detecting And I
Clay Veins: Their Physical Characteristics. Prediction, and
Evaluation of the Point Load Strength for Soft Rock Classifi
Ground Control Experiences in a High Horizontal Stress Field
Horizontal Stresses and Their Impact on Roof Stability at th
Ground Control Problem Associated with Longwall Mining of De
Geotechnical Aspects of Subsidence over Room and Pillar Mine
Proposed Criteria for Assessing Subsidence Damage to Surface
Surface Subsidence. in Longwall Mining--A Case Stud
An Integrated Approach to the Monitoring and Modeling of Gro