A Sonic Wave Attenuation Technique For Monitoring Of Stress Levels

Lin, Po-Ming
Organization: International Conference on Ground Control in Mining
Pages: 10
Publication Date: Jan 1, 1984
Stress has a significant effect on the stability of pillars. In order to get an accurate picture of pillar stability, one needs information not only on the primary Stress distribution but also on all the Subsequent Stress changes as time passes. Sonic methods are some of the fastest, most economical and least destructive means of stress prediction. The wave propagation velocity has long been applied to the investigation of the upper mantle and crust stress. Recently, it has also been applied to the prediction of rock bursts and to mine site investigations. Another parameter for investigating stresses in rocks is the attenuation coefficient. Attenuation has been observed to be more sensitive to stress changes than wave velocity; however, the measurement of attenuation is more difficult than that of wave velocity. In this paper, the mechanism of sonic attenuation in rock is reviewed. Both the velocity and the attenuation of sound waves in five different rock types under various stress fields were examined in the laboratory. It was found that for a specific rock type the relationship between the velocity ratio and stress, as well as that between the attenuation coefficient ratio and stress, can be expressed by simplified second order polynomial equations.Research showed the attenuation coefficient to be more sensitive to stress change than the velocity ratio. A field investigation method was proposed using a Schmidt hammer as a repeatable energy source. Initial trials appeared to show that monitoring by the wave attenuation method gave more repeatable data than monitoring wave velocity.
Full Article Download:
(1781 kb)


Additional chapters/articles from the SME-ICGCM book Proceeding of the Fourth Conference on Ground Control in Mining (ICGCM)

Truss Bolting On-Cycle in Jane Mine Lower Freeport Seam
Design Of A Roof Truss Bolting Plan For Bear Mine
Tension-Torque Relationship For Mechanical Anchored Roof Bol
A Novel System For Automatic Installation Of Cement Grouted
Load Transfer Mechanics In Fully-Grouted Roof Bolts
An Investigation Of Longwall Pillar Stress History
Impact Of Horizontal Load On Shield Supports
Interaction Between Roof And Support On Longwall Faces With
Roof Control With Polyurethane For Recovery Of Kitt Energy?s
First Caving And Its Effects--A Case Study
Staubbekampfung An Schildausbau In Bruchbaustreben (Combatin
Yield Pillar Applications--Impact On Strata Control And Coal
Constraint Is The Prime Variable In Pillar Strength
Massive Pillar Failure--Two Case Studies
Investigations Of Underground Coal Mine Bursts
Destressing Practice In Rockburst-Prone Ground
Statistical Characterization Of Coal-Mine Roof Failure: Sugg
Pillar Design - Continuous Miner Butt Section And Longwall D
Design Factors In Near-Seam Interaction
Remote Sensing For Roof Control And Mine Planning: An Overvi
Design, Construction And Performance Of A Single Pass Lining
Computer Modelling And In Situ Instrumentation Techniques: A
A Sonic Wave Attenuation Technique For Monitoring Of Stress
The Radio Imaging Method (RIM) -- A Means Of Detecting And I
Clay Veins: Their Physical Characteristics. Prediction, and
Evaluation of the Point Load Strength for Soft Rock Classifi
Ground Control Experiences in a High Horizontal Stress Field
Horizontal Stresses and Their Impact on Roof Stability at th
Ground Control Problem Associated with Longwall Mining of De
Geotechnical Aspects of Subsidence over Room and Pillar Mine
Proposed Criteria for Assessing Subsidence Damage to Surface
Surface Subsidence. in Longwall Mining--A Case Stud
An Integrated Approach to the Monitoring and Modeling of Gro