If you have access to OneMine as part of a member benefit, log in through your member association website for a seamless user experience.
|The mining of seams in close proximity can greatly accentuate interaction problems. At distances of less than 110 feet vertically interaction can occur for both over and under mining. Research into ground control problems resulting from undermining a previously mined seam has been carried out using finite element and body-loaded photoelastic modeling methods in conjunction with numerous case studies. Analysis of field data was used to validate and expand the model results. Research findings demonstrate situations under which the worst ground control conditions can be expected to occur for a specified geologic environment, depth, innerburden spacing and mining geometry. Special emphasis has been placed on the effects of pillar load transfer on the lower seam in terms of pillar and floor stability and roof control. Roof and floor condition indexes are used to summarize structural and lithologic conditions in the affected seam. The effects of joint orientation and continuity are incorporated in the analysis and the research results have been compiled into a software package for application by the field engineer.|
Additional chapters/articles from the SME-ICGCM book Proceeding of the Fourth Conference on Ground Control in Mining (ICGCM)
|Truss Bolting On-Cycle in Jane Mine Lower Freeport Seam||Design Of A Roof Truss Bolting Plan For Bear Mine||Tension-Torque Relationship For Mechanical Anchored Roof Bol||A Novel System For Automatic Installation Of Cement Grouted||Load Transfer Mechanics In Fully-Grouted Roof Bolts||An Investigation Of Longwall Pillar Stress History||Impact Of Horizontal Load On Shield Supports||Interaction Between Roof And Support On Longwall Faces With||Roof Control With Polyurethane For Recovery Of Kitt Energy?s||First Caving And Its Effects--A Case Study||Staubbekampfung An Schildausbau In Bruchbaustreben (Combatin||Yield Pillar Applications--Impact On Strata Control And Coal||Constraint Is The Prime Variable In Pillar Strength||Massive Pillar Failure--Two Case Studies||Investigations Of Underground Coal Mine Bursts||Destressing Practice In Rockburst-Prone Ground||Statistical Characterization Of Coal-Mine Roof Failure: Sugg||Pillar Design - Continuous Miner Butt Section And Longwall D||Design Factors In Near-Seam Interaction||Remote Sensing For Roof Control And Mine Planning: An Overvi||Design, Construction And Performance Of A Single Pass Lining||Computer Modelling And In Situ Instrumentation Techniques: A||A Sonic Wave Attenuation Technique For Monitoring Of Stress||The Radio Imaging Method (RIM) -- A Means Of Detecting And I||Clay Veins: Their Physical Characteristics. Prediction, and||Evaluation of the Point Load Strength for Soft Rock Classifi||Ground Control Experiences in a High Horizontal Stress Field||Horizontal Stresses and Their Impact on Roof Stability at th||Ground Control Problem Associated with Longwall Mining of De||Geotechnical Aspects of Subsidence over Room and Pillar Mine||Proposed Criteria for Assessing Subsidence Damage to Surface||Surface Subsidence. in Longwall Mining--A Case Stud||An Integrated Approach to the Monitoring and Modeling of Gro|