If you have access to OneMine as part of a member benefit, log in through your member association website for a seamless user experience.
|Coal mine bursts or bumps involve the violent, rapid failure of coal and rock in or around a mine excavation. Failure is normally associated with high stress and brittle or brittle-elastic materials; in coal mining, bursting may also be associated with desorbing gas, and this type of failure is termed an outburst. This paper discusses factors affecting coal mine bursts and several methods to predict bursts, including microgravity, microseismic, rheological, rebound, and drilling-yield methods. Methods to avoid burst conditions using volley firing, hydraulic fracturing, and auger drilling are also discussed. A case study is presented in which the redistribution of stresses and displacements was found to be associated with a burst at a deep longwall coal mine. The research showed that stresses are redistributed following the burst.|
Additional chapters/articles from the SME-ICGCM book Proceeding of the Fourth Conference on Ground Control in Mining (ICGCM)
|Truss Bolting On-Cycle in Jane Mine Lower Freeport Seam||Design Of A Roof Truss Bolting Plan For Bear Mine||Tension-Torque Relationship For Mechanical Anchored Roof Bol||A Novel System For Automatic Installation Of Cement Grouted||Load Transfer Mechanics In Fully-Grouted Roof Bolts||An Investigation Of Longwall Pillar Stress History||Impact Of Horizontal Load On Shield Supports||Interaction Between Roof And Support On Longwall Faces With||Roof Control With Polyurethane For Recovery Of Kitt Energy?s||First Caving And Its Effects--A Case Study||Staubbekampfung An Schildausbau In Bruchbaustreben (Combatin||Yield Pillar Applications--Impact On Strata Control And Coal||Constraint Is The Prime Variable In Pillar Strength||Massive Pillar Failure--Two Case Studies||Investigations Of Underground Coal Mine Bursts||Destressing Practice In Rockburst-Prone Ground||Statistical Characterization Of Coal-Mine Roof Failure: Sugg||Pillar Design - Continuous Miner Butt Section And Longwall D||Design Factors In Near-Seam Interaction||Remote Sensing For Roof Control And Mine Planning: An Overvi||Design, Construction And Performance Of A Single Pass Lining||Computer Modelling And In Situ Instrumentation Techniques: A||A Sonic Wave Attenuation Technique For Monitoring Of Stress||The Radio Imaging Method (RIM) -- A Means Of Detecting And I||Clay Veins: Their Physical Characteristics. Prediction, and||Evaluation of the Point Load Strength for Soft Rock Classifi||Ground Control Experiences in a High Horizontal Stress Field||Horizontal Stresses and Their Impact on Roof Stability at th||Ground Control Problem Associated with Longwall Mining of De||Geotechnical Aspects of Subsidence over Room and Pillar Mine||Proposed Criteria for Assessing Subsidence Damage to Surface||Surface Subsidence. in Longwall Mining--A Case Stud||An Integrated Approach to the Monitoring and Modeling of Gro|