If you have access to OneMine as part of a member benefit, log in through your member association website for a seamless user experience.
|In late September 1984, a longwall panel in West Virginia lost 60 powered supports when the face had advanced for 250 ft. from the setup entry. An in-mine investigation showed that it was a first weighting failure resulting from inadequate Support capacity. This paper presents the results of finite element modeling, which have led to a better understanding of the first weighting failure mechanism. The dynamic impact of the first weighting failure on the powered supports is analyzed. The optimum capacity for the powered supports in order to control the roof at face area under the geological condition is discussed.|
Additional chapters/articles from the SME-ICGCM book Proceeding of the Fourth Conference on Ground Control in Mining (ICGCM)
|Truss Bolting On-Cycle in Jane Mine Lower Freeport Seam||Design Of A Roof Truss Bolting Plan For Bear Mine||Tension-Torque Relationship For Mechanical Anchored Roof Bol||A Novel System For Automatic Installation Of Cement Grouted||Load Transfer Mechanics In Fully-Grouted Roof Bolts||An Investigation Of Longwall Pillar Stress History||Impact Of Horizontal Load On Shield Supports||Interaction Between Roof And Support On Longwall Faces With||Roof Control With Polyurethane For Recovery Of Kitt Energy?s||First Caving And Its Effects--A Case Study||Staubbekampfung An Schildausbau In Bruchbaustreben (Combatin||Yield Pillar Applications--Impact On Strata Control And Coal||Constraint Is The Prime Variable In Pillar Strength||Massive Pillar Failure--Two Case Studies||Investigations Of Underground Coal Mine Bursts||Destressing Practice In Rockburst-Prone Ground||Statistical Characterization Of Coal-Mine Roof Failure: Sugg||Pillar Design - Continuous Miner Butt Section And Longwall D||Design Factors In Near-Seam Interaction||Remote Sensing For Roof Control And Mine Planning: An Overvi||Design, Construction And Performance Of A Single Pass Lining||Computer Modelling And In Situ Instrumentation Techniques: A||A Sonic Wave Attenuation Technique For Monitoring Of Stress||The Radio Imaging Method (RIM) -- A Means Of Detecting And I||Clay Veins: Their Physical Characteristics. Prediction, and||Evaluation of the Point Load Strength for Soft Rock Classifi||Ground Control Experiences in a High Horizontal Stress Field||Horizontal Stresses and Their Impact on Roof Stability at th||Ground Control Problem Associated with Longwall Mining of De||Geotechnical Aspects of Subsidence over Room and Pillar Mine||Proposed Criteria for Assessing Subsidence Damage to Surface||Surface Subsidence. in Longwall Mining--A Case Stud||An Integrated Approach to the Monitoring and Modeling of Gro|