Determination Of Solution Cavern Spacing In Deep Salt Deposit

Mraz, Dennis Z.
Organization: International Conference on Ground Control in Mining
Pages: 10
Publication Date: Jan 1, 1984
Email to a Friend Abstract
An engineering procedure for designing the minimum separation between solution mined caverns in bedded salt deposit Is described. The procedure Is based on data obtained by In-situ and laboratory test methods. The formulae utilize the concept that salt rock under high pressure in a deep salt rock deposit would behave as a perfectly plastic substance, and that the active opening surrounding a. typical- cavern could be described by a circular ellipsoid. The paper describes the calculations required for the safe design of a solution mined salt cavern field.
Full Article Download:
(1654 kb)


Additional chapters/articles from the SME-ICGCM book Rock Mechanics in Productivity and Protection ? Proceedings Twenty five Symposium on Rock Mechanics

Mining-Induced Stress Measurement With Hydraulic Borerole Pr
Instrumentation and Monitoring For Pillar Extraction in a De
Reinforcement of Large Pillars by Bolting
Pressure Measurements in the Gob
Determination Of Solution Cavern Spacing In Deep Salt Deposi
Leached Salt Cavern Design Using a Fracture Criterion for Ro
Numerical Modeling Of "Stiff" Backfill in the Coeur D'A
Stress Control Method Applied to Stabilization of Undergroun
Optimun Mining Plan for Multiple Seam Mining
An Investigation of the Causes of Cutter Roof Failure in a C
Methods of Designing Mechanical Roof Bolting in Horizontally
Rock Bursts In Human Collieries
Constraint - The Missing Variable in the Coal Burst Problem
Prediction of Inter-Strata Movements Above Longwall Faces
Controlled Load Development At Longwall Coalfaces
Technique To Measure Resultant Load Vector On Shield Support
An Improved Technique of In-Situ Measurement Of Fracture Zo
Comprehensive Observation And Research On The Mechanism Of W
Displacement Discontinuity Method For Three-Dimensional Stre
Recent Developments In Subsidence Prediction And Control For
A Method For Assessing The Potential Of Mine Subsidence At A
Ground Movements Associated With Pillar Extraction Coal Mini
Application Of Time Domain Reflectometry To Mining
Proposed Criteria For Subsidence Damage To Buildings
Stability of Slopes in Discontinuously Jointed Rock
A Case History of the Effect of Mine Subsidence on a Concret
Microcomputer Simulation of Rock Blasting to Predict Fragmen
Probabilistic Analysis of Blasting Impact on Open Pit Stabil