Roof Bolt Bond Tester; A Device For Nondestructive Testing Of Grouted Bolts

Stateham, Raymond M.
Organization: International Conference on Ground Control in Mining
Pages: 5
Publication Date: Jan 1, 1982
The Bureau of Mines has developed a portable, lightweight device for determining the integrity of resin-grouted roof bolts. The instrument functions by sending a known pulse of ulstrasonic energy into the bolt and comparing the amount of energy reflected hack with the original measured pulse. Where the bolt is properly bonded or coupled with the rock, the energy passes through the bolt-resin-rock interface and dissipates in the rock. Where the bolt is not properly coupled, the energy is reflected back along the bolt to the instrument. The ratio of reflected energy to the pulse approximates the fraction of the bolt's surface that is improperly bonded. The instrument is easy to use. The operator holds the sensor head of the device firmly over the head of the bolt to be tested, causing the pulse of ultrasonic energy to be imparted to the bolt. The device then listens for reflected energy. This cycle is repeated about 200 times per second until an evaluation of the bolt installation is made and indicated by colored lights in the display window. Bolts having 50% or less of their surface bonded are considered had and cause a red light to he illuminated. Bolts with 50% to 75% of their surface bonded cause a yellow light to be lit and are considered marginal. Bolts having more than 75% of their surface bonded are considered good and cause a green light to be lit. The indicator lamp remains on for about 4 seconds and then goes off, indicating that the instrument is ready for another test.
Full Article Download:
(1046 kb)


Additional chapters/articles from the SME-ICGCM book Proceedings Second Conference On Ground Control In Mining

A New Approach To The Design Of Multi-Entry Developments For
Manifestation Of Mine Pressure And Its Relations To Overlyin
Geotechnical Investigation For A Single Entry Design For Lon
Roof Falls And Caving In Longwall Mining Operations
Support Resistance And Roof Behaviour Of A Longwall Face Wit
State Of The Art Testing Of Powered Roof Supports
Some Structural Aspects Of Designing The Shield Supports
Design Considerations For Angle Bolters
Machine Design Parameters For High Seam Truss Bolting Applic
Design Trade-Off For Angle Roof Drilling
Hydraulic Tensioning Of A Birmingham Roof Truss
Current Trends In Roof Truss Hardware
The Search For A Method To Provide Warning Of Coal And Gas O
Methods Used To Monitor Roof Geology And Entry Supports
A Method For Estimating Western Coal Strengths From Point Lo
Coping With High Lateral Stresses In An Underground Illinois
Alternatives For Controlling Cutter Roof In Coal Mines
Remote Sensing Techniques In Mine Planning - Applications An
The Use Of A Graphic Mini-Computer System As A Rock Mechanic
Greater Safety With Increased Productivity Coal Mining Opera
Critical Roof Span Approach To Selection Of Proper Coal Mine
Roof Bolt Bond Tester; A Device For Nondestructive Testing O
Remote Control Roof Bolting
Development Cooperation Between Operator And Manufacturer -
Research, Development, And Use Of Steel-Fiber-Reinforced Con
TV Borehole Inspection And Vacuum Testing Of Roof Strata
Use Of Automated Resistivity System To Locate Potential Subs
Control Of Mine Subsidence Utilizing Coal Ash As A Backfill
Surface Flooding-Considerations For Mining Facilities Site S
The Formation And Effects Of Transient Abutment Stress Durin
Some Technical Considerations When Mining Under Bodies Of Wa