If you have access to OneMine as part of a member benefit, log in through your member association website for a seamless user experience.
|Over the past two years research, development ad field tests have been conducted on a new product called the "Scott Cable Sling". This work resulted in the awarding of U.S. Patent No. 4265571 on May 5, 1981, to the inventor. Work on this' project was done by the staff of Scott Mine Technical Services, Inc., and is in keeping with its philosophy of advancing mine grad control technology. Recent acceptance by industry has resulted in volume purchases of the product and indications are that it will gain wide acceptance by the mining industry. The system features flexibility in its application and is useful in both roof and rib control. This paper describes the product, discusses its range of applications and cites specific field examples of its use.|
Additional chapters/articles from the SME-ICGCM book Proceedings Of The 1st Annual Conference On Ground Control In Mining
|Stress And Stability In Coal Ribsides And Pillars||Improved Design Of Coal Pillars For U.S. Mining Conditions||Review Of Pillar Design Equations Including The Effects Of C||Abutment Pillar "Notching" Improves Abutment Tunnel Roof Con||The Influence Of Certain Geologic And Geotechnical Factors O||Considerations Of Gas Outbursts In Using Dome Salt Mines For||An Overview Of Bureau Of Mines Ground Control Research||Stability Behaviour Of Coal Mining Tunnels With Different Su||Strata Disturbance Prediction For Mining Beneath Surface Wat||Monitoring For The Evaluation Of The Stability Of Undergroun||Controlled Thrust And Torque Placement Of Mechanical Anchor||Roklok Polyurethane Binder: A Chemical Injection System For||Resupporting High Roof Falls||A New Combination Friction-Suspension Support System Scott||Inorganic Cement Grouted Bolt System||Development Of A Resin Point Anchor||An Engineering Analysis Of "Squeeze" Failure Of Pillars In T||Ground Control In Multiple Seam Mining||Applications Of Reflection Seismics To Mapping Coal Seam Str||The Use Of Geologic Modeling In The Prediction Of Adverse Ro||Design Of Shield Supports For The U.S. Coal Mining Industry||Longwall Mining Of Thin Seams||Support Selection For The Multi-Lift Mining Method||Design And Operation Of Powered And Entry Supports||Evaluation Of Existing Predictive Methods For Mine Subsidenc||A Study Of Longwall Subsidence In The Appalachian Coal Regio||Subsidence Studies In Thick And Steep Coal Seam Mining|