Search Results

Search Results for "safety factor"

Search Again

Organization / Society AIME (1680) NIOSH (30) SAIMM (200) SME (1340) General Jobs News Research

Showing: 1 to 10 of 3490 matches for "safety factor"  Page   1   2   3   4   5   6   7   8   9  next TITLE Making The Most Of Wire Rope  SUMMARY ... Choice Matches Strength with Stress A wire rope should be (1) strong enough to sup- port the maximum load anticipated with a proper safety factor, (2) able to ... AUTHOR Goodwin, Robert E. PUBLISHED 1969 TITLE Safety Factor Characteristic Curves For Mine Hoisting Ropes  SUMMARY ... Safety Factor Characteristic Curves ... With each of these connected loads the safety factor char- acteristic curve for the rope will be as indicated. ... AUTHOR Boyer, W. A. PUBLISHED 1956 TITLE Face Stabilisation in Closed Shield Tunnelling  SUMMARY ... 2). The critical inclination ω of the slip surface ABFE is determined iteratively (minimization of safety factor). This sliding mecha- Page 2. ... AUTHOR Anagnostou, G. ; Kovári, K. PUBLISHED 1997 TITLE Enhancements to the LaModel Stress Analysis Program  SUMMARY ... AutoCAD visual interface, implementation of subsidence-based horizontal strain calculations for multiple-seam situations, and pillar safety factor calculations ... AUTHOR Hardy, R. ; Heasley, K. A. PUBLISHED 2006 TITLE Assessment of Potential Domain of Roof Fall in Coal Mine Entry with Probability-Based Dynamic Programming Approach  SUMMARY ... the entry system is taken into consideration to predict a roof stability by using the probability of failure instead of the common safety factor concept. ... AUTHOR Peng, Felicia F. ; Sun, Victor Z. ; Peng, Syd S. PUBLISHED 1996 TITLE Determination Of Components Of Paste Backfill And Its Economic  SUMMARY ... The lower, high strength beam has a maximum flexural stress of 0.22 MPa. By using a safety factor of 5, the required flexural strength would be 1.1 MPa. ... AUTHOR Jung, S. J. ; Brackebusch, G. PUBLISHED 2000 TITLE The Impact of the German Standard DIN 221 01 on Belt Conveyor Design  SUMMARY ... sunlight Ambient temperature Working place Craftsmanship of the workmen Quality of the splicing materials Quality of the vulcanizing apparatus Safety factor So ... AUTHOR Alles, Rainer ; Keller, Markus PUBLISHED 2004 TITLE Stability Assessment Of A Wide Stops Excavation In A Lead-Zinc Mine  SUMMARY ... heightf, 3 m an3 6 m, Firstly, the stresses in the stope back would be estimated using t two-dimensional finite element method, giving tlw safety factor of the ... AUTHOR Sheorey, P. R. ; Barat, D. ; Singh, B. PUBLISHED 1981 TITLE Pillar And Roof Bolting Design Under Conditions Of Weak Roof And Multi-Seam Interaction - A Case Study  SUMMARY ... The Mohr-Coulomb criterion was used to calculate the safety factor for the elements within the 40-ft pillar.The safety factor close to the pillar rib was 1.0 ... AUTHOR Zhang, Y. Q. ; Heasley, K. A. ; Peng, S. S. PUBLISHED 2004 TITLE Ground Mounted Friction Hoists At FMC  SUMMARY ... deep, the recommended safety factor is 6.0 so that this installation has a safety factor in excess of 8.0 for hoisting men when new ropes have been installed. ... AUTHOR Hodgson, Richard PUBLISHED 1975 Showing: 1 to 10 of 3490 matches for "safety factor"  Page   1   2   3   4   5   6   7   8   9  next Search Again